当前位置：首页 > news >正文

java网站开发书籍百度搜一下

news 2025/7/23 12:09:05

java网站开发书籍,百度搜一下,wordpress隐藏页面标题,津云疫情最新消息今天RT-Thread Studio学习（十六）定时器计数一、简介二、新建RT-Thread项目并使用外部时钟三、启用PWM输入捕获功能四、测试一、简介本文将基于STM32F407VET芯片介绍如何在RT-Thread Studio开发环境下使用定时器对输入脉冲进行计数。硬件及开发环境如下…

RT-Thread Studio学习（十六）定时器计数

一、简介
二、新建RT-Thread项目并使用外部时钟
三、启用PWM输入捕获功能
四、测试

一、简介

本文将基于STM32F407VET芯片介绍如何在RT-Thread Studio开发环境下使用定时器对输入脉冲进行计数。

硬件及开发环境如下：

OS WIN10
STM32F407VET6
STM32CubeMX v6.10.0
STM32Cube MCU Package for STM32F4 Series v1.28.0
RT-Thread Studio v2.2.7
RT-Thread Source Code v5.0.2
STM32F4 chip support packages v0.2.3

二、新建RT-Thread项目并使用外部时钟

打开RT-Thread Studio软件新建基于芯片的项目，并使用外部时钟系统，具体参见《RT-Thread Studio学习（一）使用外部时钟系统》。

三、启用PWM输入捕获功能

打开PWM驱动框架
在RT-Thread Setting 中借助图形化配置工具打开组件中的HWTIMER的驱动框架，如下图所示：
定义TIM相关的宏
将TIM5配置为PWM输入模式，在board.h文件中使能宏定义：

#define BSP_USING_TIM
#ifdef BSP_USING_TIM
#define BSP_USING_TIM5
#endif

复制TIM初始化函数
双击RT-Thread Studio工程中的cubemx.ioc文件，使能TIM5。设置Slave Mode为External Clock Mode 1，设置Trigger Source为TI1FP1。具体如下图：

不要使能TIM5的全局中断！

再重新生成STM32CubeMX代码，将.\cubemx\Src\tim.c中的函数HAL_TIM_Base_MspInit和HAL_TIM_MspPostInit复制到board.c的末尾。
再次复制函数HAL_TIM_Base_MspInit到board.c的末尾，并将其函数名改成HAL_TIM_PWM_MspInit。

在Application文件夹中添加头文件pwm_input.h，代码如下：

#ifndef APPLICATIONS_PWM_INPUT_H_
#define APPLICATIONS_PWM_INPUT_H_#include <rtthread.h>
#include <board.h>extern uint16_t PWM_RisingCount;
extern uint16_t PWM_FallingCount;
extern float duty;extern TIM_HandleTypeDef htim5;void MX_TIM2_Init(void);
void MX_TIM5_Init(void);
void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);#endif /* APPLICATIONS_PWM_INPUT_H_ */

在上文《RT-Thread Studio学习（十五）PWM测量》的源文件pwm_input.c添加代码：

TIM_HandleTypeDef htim5;
/* TIM5 init function */
void MX_TIM5_Init(void)
{/* USER CODE BEGIN TIM5_Init 0 *//* USER CODE END TIM5_Init 0 */TIM_SlaveConfigTypeDef sSlaveConfig = {0};TIM_MasterConfigTypeDef sMasterConfig = {0};/* USER CODE BEGIN TIM5_Init 1 *//* USER CODE END TIM5_Init 1 */htim5.Instance = TIM5;htim5.Init.Prescaler = 0;htim5.Init.CounterMode = TIM_COUNTERMODE_UP;htim5.Init.Period = 4294967295;htim5.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;htim5.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;if (HAL_TIM_Base_Init(&htim5) != HAL_OK){Error_Handler();}sSlaveConfig.SlaveMode = TIM_SLAVEMODE_EXTERNAL1;sSlaveConfig.InputTrigger = TIM_TS_TI1FP1;sSlaveConfig.TriggerPolarity = TIM_TRIGGERPOLARITY_RISING;sSlaveConfig.TriggerFilter = 0;if (HAL_TIM_SlaveConfigSynchro(&htim5, &sSlaveConfig) != HAL_OK){Error_Handler();}sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;if (HAL_TIMEx_MasterConfigSynchronization(&htim5, &sMasterConfig) != HAL_OK){Error_Handler();}/* USER CODE BEGIN TIM5_Init 2 */HAL_TIM_Base_Start(&htim5);/* USER CODE END TIM5_Init 2 */}

修改.\drivers\include\config\tim_config.h文件，在tim_config.h中添加代码：


#ifdef BSP_USING_TIM5
#ifndef TIM5_CONFIG
#define TIM5_CONFIG                                         \{                                                       \.tim_handle.Instance     = TIM5,                     \.tim_irqn                = TIM5_IRQn,                \.name                    = "timer5",                 \}
#endif /* TIM5_CONFIG */
#endif /* BSP_USING_TIM5 */

定义.\cubemx\Inc\stm32f4xx_hal_conf.h中的相关宏

#define HAL_TIM_MODULE_ENABLED

四、测试

修改main.c的代码为：

#include <rtthread.h>
#include "stm32f4xx.h"
#include <rtdevice.h>#define DBG_TAG "main"
#define DBG_LVL DBG_LOG
#include <rtdbg.h>#include "pwm_input.h"// PD12    ------> TIM4_CH1
// PA6     ------> TIM13_CH1
// PA7     ------> TIM14_CH1
// PA1     ------> TIM2_CH2
// PA0-WKUP------> TIM5_CH1#define PWM4_DEV_NAME         "pwm4"   /* PWM设备名称 */
#define PWM13_DEV_NAME        "pwm13"  /* PWM设备名称 */
#define PWM14_DEV_NAME        "pwm14"  /* PWM设备名称 */
#define PWM_DEV_CHANNEL     1        /* PWM通道 */
struct rt_device_pwm *pwm_dev;      /* PWM设备句柄 */rt_uint32_t channel[4], period[4], pulse[4];int pwm_init(void)
{for (int i=0; i<2; i++){period[i]  = 1000000;  /* 周期为1ms，单位为纳秒ns */pulse[i]   =  400000;  /* PWM脉冲宽度值，单位为纳秒ns */}/* 初始化设备PWM4 */pwm_dev = (struct rt_device_pwm *)rt_device_find(PWM4_DEV_NAME);if (pwm_dev == RT_NULL){rt_kprintf("pwm sample run failed! can't find %s device!\n", PWM4_DEV_NAME);return RT_ERROR;}rt_pwm_set(pwm_dev, PWM_DEV_CHANNEL, period[0], pulse[0]);rt_pwm_enable(pwm_dev, PWM_DEV_CHANNEL);/* 初始化设备PWM13 */pwm_dev = (struct rt_device_pwm *)rt_device_find(PWM13_DEV_NAME);if (pwm_dev == RT_NULL){rt_kprintf("pwm sample run failed! can't find %s device!\n", PWM13_DEV_NAME);return RT_ERROR;}rt_pwm_set(pwm_dev, PWM_DEV_CHANNEL, period[0], pulse[0]);rt_pwm_enable(pwm_dev, PWM_DEV_CHANNEL);/* 初始化设备PWM14 */pwm_dev = (struct rt_device_pwm *)rt_device_find(PWM14_DEV_NAME);if (pwm_dev == RT_NULL){rt_kprintf("pwm sample run failed! can't find %s device!\n", PWM14_DEV_NAME);return RT_ERROR;}rt_pwm_set(pwm_dev, PWM_DEV_CHANNEL, period[1], pulse[1]);rt_pwm_enable(pwm_dev, PWM_DEV_CHANNEL);return 0;
}// 第一个参数为命令，第二个参数为 PWM 设备名称，第 3 个参数为 PWM 通道，
// 第 4 个参数为周期（单位纳秒），第 5 个参数为脉冲宽度（单位纳秒）
static int  pwm_set(int argc, char *argv[])
{if(argc!=5){rt_kprintf("Usage:    pwm_set <device name> <channel> <period> <pulse>\n");rt_kprintf("Example:  pwm_set pwm13 1 100000 50000\n");return RT_ERROR;}rt_uint32_t period, pulse;char pwmdevname[RT_NAME_MAX];rt_strncpy(pwmdevname, argv[1], RT_NAME_MAX);if((!strcmp(argv[1], "pwm4")) || (!strcmp(argv[1], "pwm13")) || (!strcmp(argv[1], "pwm14"))){period  = atoi(argv[3]);  /* PWM period, ns */pulse   = atoi(argv[4]);  /* PWM pulse,  ns */}else{rt_kprintf("pwm sample run failed! can't find %s device!\n", pwmdevname);return RT_ERROR;}pwm_dev = (struct rt_device_pwm *)rt_device_find(pwmdevname);if (pwm_dev == RT_NULL){rt_kprintf("pwm sample run failed! can't find %s device!\n", pwmdevname);return RT_ERROR;}rt_pwm_set(pwm_dev, PWM_DEV_CHANNEL, period, pulse);rt_pwm_enable(pwm_dev, PWM_DEV_CHANNEL);rt_kprintf("pwm_set %s channel:%d period:%dns pulse:%dns\n", pwmdevname, PWM_DEV_CHANNEL, period, pulse);return 0;
}int main(void)
{int count = 1;LOG_D("Hello RT-Thread! 2024.1.17");LOG_D("System CLock information");LOG_D("SYSCLK_Frequency = %d", HAL_RCC_GetSysClockFreq());LOG_D("HCLK_Frequency   = %d", HAL_RCC_GetHCLKFreq());LOG_D("PCLK1_Frequency  = %d", HAL_RCC_GetPCLK1Freq());LOG_D("PCLK2_Frequency  = %d", HAL_RCC_GetPCLK2Freq());LOG_D("SysTick->LOAD    = %d", SysTick->LOAD);LOG_D("Current tick     = %d", rt_tick_get());pwm_init();MX_TIM2_Init();MX_TIM5_Init();while (count++){if(count%60 == 0) LOG_D("Hello RT-Thread! %d", rt_tick_get());if(count%20 == 0){rt_kprintf("PWM_Duty=%d% ",(int)duty);rt_kprintf(" FCNT=%d RCNT=%d \r\n", PWM_FallingCount, PWM_RisingCount);}if(count%2 == 0){rt_kprintf("ETRCNT=%d \r\n", __HAL_TIM_GET_COUNTER(&htim5));}rt_thread_mdelay(1000);}return RT_EOK;
}/* 导出到 msh 命令列表中 */
MSH_CMD_EXPORT(pwm_set, set pwm4 period/pulse. Usage: pwm_set pwm4 1 10000 5000);