当前位置：首页 > news >正文

上海网站建设机构怎样制作网站教程

news 2025/7/5 3:48:17

上海网站建设机构,怎样制作网站教程,喜迎二十大,长沙做网站nn微联讯点很好YOLO v5、v7、v8 模型优化魔改YOLOyaml 文件解读模型选择在线做数据标注 YOLO算法改进YOLOv5yolo.pyyolov5.yaml更换骨干网络之 SwinTransformer更换骨干网络之 EfficientNet优化上采样方式：轻量化算子CARAFE 替换传统（最近邻 / 双线性 / 双立方 / 三线…

YOLO v5、v7、v8 模型优化

魔改YOLO
yaml 文件解读
模型选择
在线做数据标注

YOLO算法改进
YOLOv5
yolo.py
yolov5.yaml
更换骨干网络之 SwinTransformer
更换骨干网络之 EfficientNet
优化上采样方式：轻量化算子CARAFE 替换传统（最近邻 / 双线性 / 双立方 / 三线性 / 转置卷积）
优化空间金字塔池化：SPPF / SimSPPF / ASPP / RFB / SPPCSPC 替换 SPP
优化训练策略：SIoU / EIoU / WIoU / Focal_xIoU / MPDIoU 替换 IoU
优化激活函数：SiLU、Hardswish、MemoryEfficientMish、FReLU、AconC、MetaAconC 替换 Mish函数
优化损失函数：多种类Loss, PolyLoss / VarifocalLoss / GFL / QualityFLoss / FL
优化损失函数：改进用于微小目标检测的 Normalized Gaussian Wasserstein Distance
引入 GSConv
引入特征融合网络 BiFPN：提高检测精度和效率
引入 YOLOv6 颈部 BiFusion Neck
引入注意力机制：在 C3 模块添加添加注意力机制
添加【SE】【CBAM】【 ECA 】【CA】
添加【SimAM】【CoTAttention】【SKAttention】【DoubleAttention】
添加【EffectiveSE】【GlobalContext】【GatherExcite】【MHSA】
添加【Triplet】【SpatialGroupEnhance】【NAM】【S2】

引入小目标检测：用于低分辨率图像和小物体的新 CNN 模块SPD-Conv
引入轻量化卷积替换传统卷积
引入独立注意力 FPN + PAN 结构替换传统卷积
引入 YOLOX 解耦头
引入 YOLOv8 的 C2f 模块
引入 RepVGG 重参数化模块
引入密集连接模块
模型剪枝
知识蒸馏
热力图可视化

YOLOv7
更换骨干网络之 SwinTransformer
更换骨干网络之 EfficientNet
优化上采样方式：轻量化算子CARAFE 替换传统（最近邻 / 双线性 / 双立方 / 三线性 / 转置卷积）
优化空间金字塔池化：SPPF / SimSPPF / ASPP / RFB / SPPCSPC / SPPFCSPC 替换 SPP
优化训练策略：SIoU / EIoU / WIoU / Focal_xIoU / MPDIoU 替换 IoU
优化激活函数：SiLU、Hardswish、MemoryEfficientMish、FReLU、AconC、MetaAconC 替换 Mish函数
优化标签分配策略：基于TOOD标签分配策略改进
优化损失函数：SIoU等结合FocalLoss应用：组成Focal-EIoU｜Focal-SIoU｜Focal-CIoU｜Focal-GIoU、DIoU
优化损失函数：Wise-IoU
优化特征集成方法：目标检测的渐近特征金字塔网络AsymptoticFPN
引入 BiFPN 特征融合网络：提高检测精度和效率
引入 YOLOv6 颈部 BiFusion Neck
引入小目标检测：用于低分辨率图像和小物体的新 CNN 模块SPD-Conv
引入轻量化卷积替换传统卷积
引入 YOLOX 解耦头
引入 YOLOv8 的 C2f 模块
引入 RepVGG 重参数化模块
引入密集连接模块
引入用于小目标检测的归一化高斯 Wasserstein Distance Loss
引入Generalized Focal Loss
模型剪枝
知识蒸馏
热力图可视化

YOLOv8
更换主干网络之 VanillaNet
更换主干网络之 FasterNet
更换骨干网络之 SwinTransformer
更换骨干网络之 CReToNeXt
更换主干之 MAE
更换主干之 QARepNeXt
更换主干之 RepLKNet
引入注意力机制：在 C2F 模块添加添加注意力机制
添加【SE】【CBAM】【 ECA 】【CA 】
添加【SimAM】【CoTAttention】【SKAttention】【DoubleAttention】
添加【EffectiveSE】【GlobalContext】【GatherExcite】【MHSA】
添加【Triplet】【SpatialGroupEnhance】【NAM】【S2】
添加【ParNet】【CrissCross】【GAM】【ParallelPolarized】【Sequential】

引入 RepVGG 重参数化模块
引入 SPD-Conv 替换 Conv
引入跨空间学习的高效多尺度注意力 Efficient Multi-Scale Attention
引入选择性注意力 LSK 模块
引入空间通道重组卷积
引入轻量级通用上采样算子CARAFE
引入全维动态卷积
引入 BiFPN 结构
引入 Slim-neck
引入中心化特征金字塔 EVC 模块
引入渐进特征金字塔网络 AFPN 结构
引入大目标检测头、小目标检测头
引入谷歌 Lion 优化器
引入小目标检测结构：CBiF、BiFB
优化FPN结构
优化损失函数：FocalLoss结合变种IoU套装
优化损失函数：Wise-IoU
优化损失函数：遮挡损失函数 Repulsion Loss
优化卷积：PWConv
优化 EfficientRep 结构：结合硬件感知神经网络设计的 Repvgg 的 ConvNet 网络结构
优化特征集成方法：目标检测的渐近特征金字塔网络AsymptoticFPN
优化检测方法：EfficiCLNMS

魔改YOLO

yaml 文件解读

比如我们用 V8 做一个分类任务，那我们需要看 V8分类模型的 .yaml 文件。

yolov8-cls.yaml （ultralytics/models/v8/yolov8-cls.yaml）

# Parameters
nc: 1000  # 数据集有多少类别
scales:   # 调整YOLO模型的深度、宽度和通道数，通过选择不同的规模，可以根据具体的需求来调整模型的大小和性能，从而实现更好的检测结果。# 网络规模：[深度、宽度和通道数]n: [0.33, 0.25, 1024]       # n: 较小的规模s: [0.33, 0.50, 1024]       # s: 小规模m: [0.67, 0.75, 1024]       # m: 中等规模l: [1.00, 1.00, 1024]       # l: 大规模x: [1.00, 1.25, 1024]       # x: 最大规模# YOLOv8.0n backbone
backbone:# [ 从哪层获取输入（-1是上一层，[-1,6]是从上一层和第6层）, 模块重复次数, 模块名字（Conv是卷积层）, args]- [-1, 1, Conv, [64, 3, 2]]   # 0-P1/2  第 0 层：P1是第1特征层，缩小为输入图像的1/2，64代表输出通道数，3代表卷积核大小k，2代表stride步长- [-1, 1, Conv, [128, 3, 2]]  # 1-P2/4  第 1 层：P2是第2特征层，缩小为输入图像的1/4，128代表输出通道数，3代表卷积核大小k，2代表stride步长- [-1, 3, C2f, [128, True]]             第 2 层：本层是C2f模块，3代表本层重复3次。128代表输出通道数，True表示Bottleneck有shortcut。- [-1, 1, Conv, [256, 3, 2]]  # 3-P3/8  P3是第3特征层，缩小为输入图像的1/8- [-1, 6, C2f, [256, True]]- [-1, 1, Conv, [512, 3, 2]]  # 5-P4/16  P4是第4特征层，缩小为输入图像的1/16- [-1, 6, C2f, [512, True]]- [-1, 1, Conv, [1024, 3, 2]]  # 7-P5/32  P5是第5特征层，缩小为输入图像的1/32- [-1, 3, C2f, [1024, True]]# YOLOv8.0n head
head:- [-1, 1, Classify, [nc]]  # Classify

yaml 文件分为：

参数部分：nc（数据集类别数量）、
网络结构部分：from（从哪层获取输入）, repeats（模块重复次数）, module（模块名字）, args
头部部分

模型选择

在线做数据标注

由于 Labelimg 和 Labelme 安装起来比较麻烦，我们使用在线标注工具make sense：https://www.makesense.ai

准备类别数据集，每添加一个类别文件夹：

在添加标签：

把图中类别标注出来：

点选 Actions -> Export Annotations 导出标注：

数据标注文件：

0 0.329611 0.329853 0.339493 0.259214
0 0.698680 0.656634 0.339493 0.266585
0 0.770694 0.244472 0.318917 0.194103
0 0.813131 0.104423 0.073300 0.063882
类别标签   目标中心点坐标x    目标中心点坐标y    宽度     高度
类别标签：此处的序号是按照Make Sense中的标签"顺序"排列的，0 是第一个类别

YOLO算法改进

YOLO算法改进，无非六方面：

更快更强的网络架构
更有效的特征集成方法
更准确的检测方法
更精确的损失函数
更有效的标签分配方法
更有效的训练方法

YOLOv5

yolo.py

ultralytics/yolo5/models/yolo.py：

import argparse
import contextlib
import os
import platform
import sys
from copy import deepcopy
from pathlib import PathFILE = Path(__file__).resolve()
ROOT = FILE.parents[1]  # YOLOv5 root directory
if str(ROOT) not in sys.path:sys.path.append(str(ROOT))  # add ROOT to PATH
if platform.system() != 'Windows':ROOT = Path(os.path.relpath(ROOT, Path.cwd()))  # relativefrom models.common import *  # noqa
from models.experimental import *  # noqa
from utils.autoanchor import check_anchor_order
from utils.general import LOGGER, check_version, check_yaml, make_divisible, print_args
from utils.plots import feature_visualization
from utils.torch_utils import (fuse_conv_and_bn, initialize_weights, model_info, profile, scale_img, select_device,time_sync)try:import thop  # for FLOPs computation
except ImportError:thop = Noneclass Detect(nn.Module):# YOLOv5 Detect head for detection modelsstride = None  # strides computed during builddynamic = False  # force grid reconstructionexport = False  # export modedef __init__(self, nc=80, anchors=(), ch=(), inplace=True):  # detection layersuper().__init__()self.nc = nc  # number of classesself.no = nc + 5  # number of outputs per anchorself.nl = len(anchors)  # number of detection layersself.na = len(anchors[0]) // 2  # number of anchorsself.grid = [torch.empty(0) for _ in range(self.nl)]  # init gridself.anchor_grid = [torch.empty(0) for _ in range(self.nl)]  # init anchor gridself.register_buffer('anchors', torch.tensor(anchors).float().view(self.nl, -1, 2))  # shape(nl,na,2)self.m = nn.ModuleList(nn.Conv2d(x, self.no * self.na, 1) for x in ch)  # output convself.inplace = inplace  # use inplace ops (e.g. slice assignment)def forward(self, x):z = []  # inference outputfor i in range(self.nl):x[i] = self.m[i](x[i])  # convbs, _, ny, nx = x[i].shape  # x(bs,255,20,20) to x(bs,3,20,20,85)x[i] = x[i].view(bs, self.na, self.no, ny, nx).permute(0, 1, 3, 4, 2).contiguous()if not self.training:  # inferenceif self.dynamic or self.grid[i].shape[2:4] != x[i].shape[2:4]:self.grid[i], self.anchor_grid[i] = self._make_grid(nx, ny, i)if isinstance(self, Segment):  # (boxes + masks)xy, wh, conf, mask = x[i].split((2, 2, self.nc + 1, self.no - self.nc - 5), 4)xy = (xy.sigmoid() * 2 + self.grid[i]) * self.stride[i]  # xywh = (wh.sigmoid() * 2) ** 2 * self.anchor_grid[i]  # why = torch.cat((xy, wh, conf.sigmoid(), mask), 4)else:  # Detect (boxes only)xy, wh, conf = x[i].sigmoid().split((2, 2, self.nc + 1), 4)xy = (xy * 2 + self.grid[i]) * self.stride[i]  # xywh = (wh * 2) ** 2 * self.anchor_grid[i]  # why = torch.cat((xy, wh, conf), 4)z.append(y.view(bs, self.na * nx * ny, self.no))return x if self.training else (torch.cat(z, 1), ) if self.export else (torch.cat(z, 1), x)def _make_grid(self, nx=20, ny=20, i=0, torch_1_10=check_version(torch.__version__, '1.10.0')):d = self.anchors[i].devicet = self.anchors[i].dtypeshape = 1, self.na, ny, nx, 2  # grid shapey, x = torch.arange(ny, device=d, dtype=t), torch.arange(nx, device=d, dtype=t)yv, xv = torch.meshgrid(y, x, indexing='ij') if torch_1_10 else torch.meshgrid(y, x)  # torch>=0.7 compatibilitygrid = torch.stack((xv, yv), 2).expand(shape) - 0.5  # add grid offset, i.e. y = 2.0 * x - 0.5anchor_grid = (self.anchors[i] * self.stride[i]).view((1, self.na, 1, 1, 2)).expand(shape)return grid, anchor_gridclass Segment(Detect):# YOLOv5 Segment head for segmentation modelsdef __init__(self, nc=80, anchors=(), nm=32, npr=256, ch=(), inplace=True):super().__init__(nc, anchors, ch, inplace)self.nm = nm  # number of masksself.npr = npr  # number of protosself.no = 5 + nc + self.nm  # number of outputs per anchorself.m = nn.ModuleList(nn.Conv2d(x, self.no * self.na, 1) for x in ch)  # output convself.proto = Proto(ch[0], self.npr, self.nm)  # protosself.detect = Detect.forwarddef forward(self, x):p = self.proto(x[0])x = self.detect(self, x)return (x, p) if self.training else (x[0], p) if self.export else (x[0], p, x[1])class BaseModel(nn.Module):# YOLOv5 base modeldef forward(self, x, profile=False, visualize=False):return self._forward_once(x, profile, visualize)  # single-scale inference, traindef _forward_once(self, x, profile=False, visualize=False):y, dt = [], []  # outputsfor m in self.model:if m.f != -1:  # if not from previous layerx = y[m.f] if isinstance(m.f, int) else [x if j == -1 else y[j] for j in m.f]  # from earlier layersif profile:self._profile_one_layer(m, x, dt)x = m(x)  # runy.append(x if m.i in self.save else None)  # save outputif visualize:feature_visualization(x, m.type, m.i, save_dir=visualize)return xdef _profile_one_layer(self, m, x, dt):c = m == self.model[-1]  # is final layer, copy input as inplace fixo = thop.profile(m, inputs=(x.copy() if c else x, ), verbose=False)[0] / 1E9 * 2 if thop else 0  # FLOPst = time_sync()for _ in range(10):m(x.copy() if c else x)dt.append((time_sync() - t) * 100)if m == self.model[0]:LOGGER.info(f"{'time (ms)':>10s} {'GFLOPs':>10s} {'params':>10s}  module")LOGGER.info(f'{dt[-1]:10.2f} {o:10.2f} {m.np:10.0f}  {m.type}')if c:LOGGER.info(f"{sum(dt):10.2f} {'-':>10s} {'-':>10s}  Total")def fuse(self):  # fuse model Conv2d() + BatchNorm2d() layersLOGGER.info('Fusing layers... ')for m in self.model.modules():if isinstance(m, (Conv, DWConv)) and hasattr(m, 'bn'):m.conv = fuse_conv_and_bn(m.conv, m.bn)  # update convdelattr(m, 'bn')  # remove batchnormm.forward = m.forward_fuse  # update forwardself.info()return selfdef info(self, verbose=False, img_size=640):  # print model informationmodel_info(self, verbose, img_size)def _apply(self, fn):# Apply to(), cpu(), cuda(), half() to model tensors that are not parameters or registered buffersself = super()._apply(fn)m = self.model[-1]  # Detect()if isinstance(m, (Detect, Segment)):m.stride = fn(m.stride)m.grid = list(map(fn, m.grid))if isinstance(m.anchor_grid, list):m.anchor_grid = list(map(fn, m.anchor_grid))return selfclass DetectionModel(BaseModel):# YOLOv5 detection modeldef __init__(self, cfg='yolov5s.yaml', ch=3, nc=None, anchors=None):  # model, input channels, number of classessuper().__init__()if isinstance(cfg, dict):self.yaml = cfg  # model dictelse:  # is *.yamlimport yaml  # for torch hubself.yaml_file = Path(cfg).namewith open(cfg, encoding='ascii', errors='ignore') as f:self.yaml = yaml.safe_load(f)  # model dict# Define modelch = self.yaml['ch'] = self.yaml.get('ch', ch)  # input channelsif nc and nc != self.yaml['nc']:LOGGER.info(f"Overriding model.yaml nc={self.yaml['nc']} with nc={nc}")self.yaml['nc'] = nc  # override yaml valueif anchors:LOGGER.info(f'Overriding model.yaml anchors with anchors={anchors}')self.yaml['anchors'] = round(anchors)  # override yaml valueself.model, self.save = parse_model(deepcopy(self.yaml), ch=[ch])  # model, savelistself.names = [str(i) for i in range(self.yaml['nc'])]  # default namesself.inplace = self.yaml.get('inplace', True)# Build strides, anchorsm = self.model[-1]  # Detect()if isinstance(m, (Detect, Segment)):s = 256  # 2x min stridem.inplace = self.inplaceforward = lambda x: self.forward(x)[0] if isinstance(m, Segment) else self.forward(x)m.stride = torch.tensor([s / x.shape[-2] for x in forward(torch.zeros(1, ch, s, s))])  # forwardcheck_anchor_order(m)m.anchors /= m.stride.view(-1, 1, 1)self.stride = m.strideself._initialize_biases()  # only run once# Init weights, biasesinitialize_weights(self)self.info()LOGGER.info('')def forward(self, x, augment=False, profile=False, visualize=False):if augment:return self._forward_augment(x)  # augmented inference, Nonereturn self._forward_once(x, profile, visualize)  # single-scale inference, traindef _forward_augment(self, x):img_size = x.shape[-2:]  # height, widths = [1, 0.83, 0.67]  # scalesf = [None, 3, None]  # flips (2-ud, 3-lr)y = []  # outputsfor si, fi in zip(s, f):xi = scale_img(x.flip(fi) if fi else x, si, gs=int(self.stride.max()))yi = self._forward_once(xi)[0]  # forward# cv2.imwrite(f'img_{si}.jpg', 255 * xi[0].cpu().numpy().transpose((1, 2, 0))[:, :, ::-1])  # saveyi = self._descale_pred(yi, fi, si, img_size)y.append(yi)y = self._clip_augmented(y)  # clip augmented tailsreturn torch.cat(y, 1), None  # augmented inference, traindef _descale_pred(self, p, flips, scale, img_size):# de-scale predictions following augmented inference (inverse operation)if self.inplace:p[..., :4] /= scale  # de-scaleif flips == 2:p[..., 1] = img_size[0] - p[..., 1]  # de-flip udelif flips == 3:p[..., 0] = img_size[1] - p[..., 0]  # de-flip lrelse:x, y, wh = p[..., 0:1] / scale, p[..., 1:2] / scale, p[..., 2:4] / scale  # de-scaleif flips == 2:y = img_size[0] - y  # de-flip udelif flips == 3:x = img_size[1] - x  # de-flip lrp = torch.cat((x, y, wh, p[..., 4:]), -1)return pdef _clip_augmented(self, y):# Clip YOLOv5 augmented inference tailsnl = self.model[-1].nl  # number of detection layers (P3-P5)g = sum(4 ** x for x in range(nl))  # grid pointse = 1  # exclude layer counti = (y[0].shape[1] // g) * sum(4 ** x for x in range(e))  # indicesy[0] = y[0][:, :-i]  # largei = (y[-1].shape[1] // g) * sum(4 ** (nl - 1 - x) for x in range(e))  # indicesy[-1] = y[-1][:, i:]  # smallreturn ydef _initialize_biases(self, cf=None):  # initialize biases into Detect(), cf is class frequency# https://arxiv.org/abs/1708.02002 section 3.3# cf = torch.bincount(torch.tensor(np.concatenate(dataset.labels, 0)[:, 0]).long(), minlength=nc) + 1.m = self.model[-1]  # Detect() modulefor mi, s in zip(m.m, m.stride):  # fromb = mi.bias.view(m.na, -1)  # conv.bias(255) to (3,85)b.data[:, 4] += math.log(8 / (640 / s) ** 2)  # obj (8 objects per 640 image)b.data[:, 5:5 + m.nc] += math.log(0.6 / (m.nc - 0.99999)) if cf is None else torch.log(cf / cf.sum())  # clsmi.bias = torch.nn.Parameter(b.view(-1), requires_grad=True)Model = DetectionModel  # retain YOLOv5 'Model' class for backwards compatibilityclass SegmentationModel(DetectionModel):# YOLOv5 segmentation modeldef __init__(self, cfg='yolov5s-seg.yaml', ch=3, nc=None, anchors=None):super().__init__(cfg, ch, nc, anchors)class ClassificationModel(BaseModel):# YOLOv5 classification modeldef __init__(self, cfg=None, model=None, nc=1000, cutoff=10):  # yaml, model, number of classes, cutoff indexsuper().__init__()self._from_detection_model(model, nc, cutoff) if model is not None else self._from_yaml(cfg)def _from_detection_model(self, model, nc=1000, cutoff=10):# Create a YOLOv5 classification model from a YOLOv5 detection modelif isinstance(model, DetectMultiBackend):model = model.model  # unwrap DetectMultiBackendmodel.model = model.model[:cutoff]  # backbonem = model.model[-1]  # last layerch = m.conv.in_channels if hasattr(m, 'conv') else m.cv1.conv.in_channels  # ch into modulec = Classify(ch, nc)  # Classify()c.i, c.f, c.type = m.i, m.f, 'models.common.Classify'  # index, from, typemodel.model[-1] = c  # replaceself.model = model.modelself.stride = model.strideself.save = []self.nc = ncdef _from_yaml(self, cfg):# Create a YOLOv5 classification model from a *.yaml fileself.model = Nonedef parse_model(d, ch):  # model_dict, input_channels(3)# Parse a YOLOv5 model.yaml dictionaryLOGGER.info(f"\n{'':>3}{'from':>18}{'n':>3}{'params':>10}  {'module':<40}{'arguments':<30}")anchors, nc, gd, gw, act = d['anchors'], d['nc'], d['depth_multiple'], d['width_multiple'], d.get('activation')if act:Conv.default_act = eval(act)  # redefine default activation, i.e. Conv.default_act = nn.SiLU()LOGGER.info(f"{colorstr('activation:')} {act}")  # printna = (len(anchors[0]) // 2) if isinstance(anchors, list) else anchors  # number of anchorsno = na * (nc + 5)  # number of outputs = anchors * (classes + 5)layers, save, c2 = [], [], ch[-1]  # layers, savelist, ch outfor i, (f, n, m, args) in enumerate(d['backbone'] + d['head']):  # from, number, module, argsm = eval(m) if isinstance(m, str) else m  # eval stringsfor j, a in enumerate(args):with contextlib.suppress(NameError):args[j] = eval(a) if isinstance(a, str) else a  # eval stringsn = n_ = max(round(n * gd), 1) if n > 1 else n  # depth gainif m in {Conv, GhostConv, Bottleneck, GhostBottleneck, SPP, SPPF, DWConv, MixConv2d, Focus, CrossConv,BottleneckCSP, C3, C3TR, C3SPP, C3Ghost, nn.ConvTranspose2d, DWConvTranspose2d, C3x}:c1, c2 = ch[f], args[0]if c2 != no:  # if not outputc2 = make_divisible(c2 * gw, 8)args = [c1, c2, *args[1:]]if m in {BottleneckCSP, C3, C3TR, C3Ghost, C3x}:args.insert(2, n)  # number of repeatsn = 1elif m is nn.BatchNorm2d:args = [ch[f]]elif m is Concat:c2 = sum(ch[x] for x in f)# TODO: channel, gw, gdelif m in {Detect, Segment}:args.append([ch[x] for x in f])if isinstance(args[1], int):  # number of anchorsargs[1] = [list(range(args[1] * 2))] * len(f)if m is Segment:args[3] = make_divisible(args[3] * gw, 8)elif m is Contract:c2 = ch[f] * args[0] ** 2elif m is Expand:c2 = ch[f] // args[0] ** 2else:c2 = ch[f]m_ = nn.Sequential(*(m(*args) for _ in range(n))) if n > 1 else m(*args)  # modulet = str(m)[8:-2].replace('__main__.', '')  # module typenp = sum(x.numel() for x in m_.parameters())  # number paramsm_.i, m_.f, m_.type, m_.np = i, f, t, np  # attach index, 'from' index, type, number paramsLOGGER.info(f'{i:>3}{str(f):>18}{n_:>3}{np:10.0f}  {t:<40}{str(args):<30}')  # printsave.extend(x % i for x in ([f] if isinstance(f, int) else f) if x != -1)  # append to savelistlayers.append(m_)if i == 0:ch = []ch.append(c2)return nn.Sequential(*layers), sorted(save)if __name__ == '__main__':parser = argparse.ArgumentParser()parser.add_argument('--cfg', type=str, default='yolov5s.yaml', help='model.yaml')parser.add_argument('--batch-size', type=int, default=1, help='total batch size for all GPUs')parser.add_argument('--device', default='', help='cuda device, i.e. 0 or 0,1,2,3 or cpu')parser.add_argument('--profile', action='store_true', help='profile model speed')parser.add_argument('--line-profile', action='store_true', help='profile model speed layer by layer')parser.add_argument('--test', action='store_true', help='test all yolo*.yaml')opt = parser.parse_args()opt.cfg = check_yaml(opt.cfg)  # check YAMLprint_args(vars(opt))device = select_device(opt.device)# Create modelim = torch.rand(opt.batch_size, 3, 640, 640).to(device)model = Model(opt.cfg).to(device)# Optionsif opt.line_profile:  # profile layer by layermodel(im, profile=True)elif opt.profile:  # profile forward-backwardresults = profile(input=im, ops=[model], n=3)elif opt.test:  # test all modelsfor cfg in Path(ROOT / 'models').rglob('yolo*.yaml'):try:_ = Model(cfg)except Exception as e:print(f'Error in {cfg}: {e}')else:  # report fused model summarymodel.fuse()

yolov5.yaml

ultralytics/models/v5/yolov5.yaml：

# Parameters
nc: 80  # number of classes
scales: # model compound scaling constants, i.e. 'model=yolov5n.yaml' will call yolov5.yaml with scale 'n'# [depth, width, max_channels]n: [0.33, 0.25, 1024]s: [0.33, 0.50, 1024]m: [0.67, 0.75, 1024]l: [1.00, 1.00, 1024]x: [1.33, 1.25, 1024]# YOLOv5 v6.0 backbone
backbone:# [from, number, module, args][[-1, 1, Conv, [64, 6, 2, 2]],  # 0-P1/2[-1, 1, Conv, [128, 3, 2]],  # 1-P2/4[-1, 3, C3, [128]],[-1, 1, Conv, [256, 3, 2]],  # 3-P3/8[-1, 6, C3, [256]],[-1, 1, Conv, [512, 3, 2]],  # 5-P4/16[-1, 9, C3, [512]],[-1, 1, Conv, [1024, 3, 2]],  # 7-P5/32[-1, 3, C3, [1024]],[-1, 1, SPPF, [1024, 5]],  # 9]# YOLOv5 v6.0 head
head:[[-1, 1, Conv, [512, 1, 1]],[-1, 1, nn.Upsample, [None, 2, 'nearest']],[[-1, 6], 1, Concat, [1]],  # cat backbone P4[-1, 3, C3, [512, False]],  # 13[-1, 1, Conv, [256, 1, 1]],[-1, 1, nn.Upsample, [None, 2, 'nearest']],[[-1, 4], 1, Concat, [1]],  # cat backbone P3[-1, 3, C3, [256, False]],  # 17 (P3/8-small)[-1, 1, Conv, [256, 3, 2]],[[-1, 14], 1, Concat, [1]],  # cat head P4[-1, 3, C3, [512, False]],  # 20 (P4/16-medium)[-1, 1, Conv, [512, 3, 2]],[[-1, 10], 1, Concat, [1]],  # cat head P5[-1, 3, C3, [1024, False]],  # 23 (P5/32-large)[[17, 20, 23], 1, Detect, [nc]],  # Detect(P3, P4, P5)]

更换骨干网络之 SwinTransformer

更换骨干网络之 EfficientNet

优化上采样方式：轻量化算子CARAFE 替换传统（最近邻 / 双线性 / 双立方 / 三线性 / 转置卷积）

上采样（Upsampling）是一种图像处理中的操作，用于将低分辨率的图像或特征图增加到高分辨率。

在计算机视觉中，上采样常常用于将低分辨率的特征图恢复到原始图像的尺寸，或者在图像生成任务中生成更高分辨率的图像。

常见的上采样方式包括：

最近邻插值（Nearest Neighbor Interpolation）：最简单的上采样方法，将低分辨率图像的每个像素复制到对应的多个像素位置，以增加图像的尺寸和分辨率。这种方法不考虑像素之间的差异，可能会导致图像的锯齿状边缘。
双线性插值（Bilinear Interpolation）：通过在四个最近的像素之间进行插值来计算新像素的值。这种方法考虑了像素之间的差异，可以得到更平滑的上采样结果。
双三次插值（Bicubic Interpolation）：在双线性插值的基础上进行进一步的插值计算，使用更多的像素进行插值计算，得到更平滑的上采样结果。然而，双三次插值计算量较大。
转置卷积（Transposed Convolution）：也称为反卷积（Deconvolution），通过使用卷积操作的反向计算过程来实现上采样。转置卷积通过填充和卷积核的反向操作，将低分辨率特征图恢复到原始尺寸。

这些上采样方法在不同的任务和场景中具有不同的适用性和效果。选择合适的上采样方法取决于任务的需求、计算资源和对图像质量的要求。

图像超分辨率：当需要将低分辨率图像恢复到高分辨率时，双线性插值和双三次插值是常用的方法。它们能够增加图像的细节，并且计算效率较高。
目标检测和语义分割：在目标检测和语义分割等任务中，需要将低分辨率的特征图上采样到原始图像的尺寸。转置卷积是常用的上采样方法，因为它能够学习到更复杂的特征重建，并且能够保持较好的位置信息。
图像生成：在图像生成任务中，需要生成高分辨率的图像。转置卷积通常被用于将低分辨率的噪声向量映射到高分辨率图像空间。
图像风格转换：在图像风格转换任务中，需要将输入图像的风格转换为目标风格。双线性插值在这种情况下也是常用的上采样方法，因为它能够保持较好的图像纹理和细节。

在 YOLOv5 中，上采样模块是使用 nn.Upsample 实现的。

具体来说，YOLOv5 中使用的上采样模块包括两种类型：

nn.Upsample(scale_factor=2, mode=‘nearest’)，这种上采样模块是通过最近邻插值实现的。

它用于将特征图的大小增加一倍，例如在 yolov5s 中将 16x16 特征图上采样到 32x32。
nn.ConvTranspose2d(in_channels, out_channels, kernel_size=2, stride=2)，这种上采样模块是通过转置卷积实现的。

它用于将特征图的大小增加一倍，并且可以学习更加复杂的上采样方式。在 YOLOv5 中，这种上采样模块在 yolov5m、yolov5l 和 yolov5x 中使用。

把 CARAFE 添加到 common.py：

import torch.nn.functional as Fclass CARAFE(nn.Module):     # CARAFE: Content-Aware ReAssembly of FEatures       https://arxiv.org/pdf/1905.02188.pdfdef __init__(self, c1, c2, kernel_size=3, up_factor=2):super(CARAFE, self).__init__()self.kernel_size = kernel_sizeself.up_factor = up_factorself.down = nn.Conv2d(c1, c1 // 4, 1)self.encoder = nn.Conv2d(c1 // 4, self.up_factor ** 2 * self.kernel_size ** 2,self.kernel_size, 1, self.kernel_size // 2)self.out = nn.Conv2d(c1, c2, 1)def forward(self, x):N, C, H, W = x.size()# N,C,H,W -> N,C,delta*H,delta*W# kernel prediction modulekernel_tensor = self.down(x)  # (N, Cm, H, W)kernel_tensor = self.encoder(kernel_tensor)  # (N, S^2 * Kup^2, H, W)kernel_tensor = F.pixel_shuffle(kernel_tensor, self.up_factor)  # (N, S^2 * Kup^2, H, W)->(N, Kup^2, S*H, S*W)kernel_tensor = F.softmax(kernel_tensor, dim=1)  # (N, Kup^2, S*H, S*W)kernel_tensor = kernel_tensor.unfold(2, self.up_factor, step=self.up_factor) # (N, Kup^2, H, W*S, S)kernel_tensor = kernel_tensor.unfold(3, self.up_factor, step=self.up_factor) # (N, Kup^2, H, W, S, S)kernel_tensor = kernel_tensor.reshape(N, self.kernel_size ** 2, H, W, self.up_factor ** 2) # (N, Kup^2, H, W, S^2)kernel_tensor = kernel_tensor.permute(0, 2, 3, 1, 4)  # (N, H, W, Kup^2, S^2)# content-aware reassembly module# tensor.unfold: dim, size, stepx = F.pad(x, pad=(self.kernel_size // 2, self.kernel_size // 2,self.kernel_size // 2, self.kernel_size // 2),mode='constant', value=0) # (N, C, H+Kup//2+Kup//2, W+Kup//2+Kup//2)x = x.unfold(2, self.kernel_size, step=1) # (N, C, H, W+Kup//2+Kup//2, Kup)x = x.unfold(3, self.kernel_size, step=1) # (N, C, H, W, Kup, Kup)x = x.reshape(N, C, H, W, -1) # (N, C, H, W, Kup^2)x = x.permute(0, 2, 3, 1, 4)  # (N, H, W, C, Kup^2)out_tensor = torch.matmul(x, kernel_tensor)  # (N, H, W, C, S^2)out_tensor = out_tensor.reshape(N, H, W, -1)out_tensor = out_tensor.permute(0, 3, 1, 2)out_tensor = F.pixel_shuffle(out_tensor, self.up_factor)out_tensor = self.out(out_tensor)return out_tensor

model/yolo.py 添加这层：

修改前：if m in {Conv, GhostConv, Bottleneck, GhostBottleneck, SPP, SPPF, DWConv, MixConv2d, Focus, CrossConv,BottleneckCSP, C3, C3TR, C3SPP, C3Ghost, nn.ConvTranspose2d, DWConvTranspose2d, C3x}:  修改后：if m in {Conv, GhostConv, Bottleneck, GhostBottleneck, SPP, SPPF, DWConv, MixConv2d, Focus, CrossConv,BottleneckCSP, C3, C3TR, C3SPP, C3Ghost, nn.ConvTranspose2d, DWConvTranspose2d, C3x, CARAFE}:

修改一下 ultralytics/models/v5/yolov5.yaml：

# Parameters
nc: 80  # number of classes
scales: # model compound scaling constants, i.e. 'model=yolov5n.yaml' will call yolov5.yaml with scale 'n'# [depth, width, max_channels]n: [0.33, 0.25, 1024]s: [0.33, 0.50, 1024]m: [0.67, 0.75, 1024]l: [1.00, 1.00, 1024]x: [1.33, 1.25, 1024]# YOLOv5 v6.0 backbone
backbone:# [from, number, module, args][[-1, 1, Conv, [64, 6, 2, 2]],  # 0-P1/2[-1, 1, Conv, [128, 3, 2]],  # 1-P2/4[-1, 3, C3, [128]],[-1, 1, Conv, [256, 3, 2]],  # 3-P3/8[-1, 6, C3, [256]],[-1, 1, Conv, [512, 3, 2]],  # 5-P4/16[-1, 9, C3, [512]],[-1, 1, Conv, [1024, 3, 2]],  # 7-P5/32[-1, 3, C3, [1024]],[-1, 1, SPPF, [1024, 5]],  # 9]# YOLOv5 v6.0 head
head:[[-1, 1, Conv, [512, 1, 1]],[-1, 1, nn.Upsample, [None, 2, 'nearest']],[[-1, 6], 1, Concat, [1]],  # cat backbone P4[-1, 3, C3, [512, False]],  # 13[-1, 1, Conv, [256, 1, 1]],[-1, 1, nn.Upsample, [None, 2, 'nearest']],[[-1, 4], 1, Concat, [1]],  # cat backbone P3[-1, 3, C3, [256, False]],  # 17 (P3/8-small)[-1, 1, Conv, [256, 3, 2]],[[-1, 14], 1, Concat, [1]],  # cat head P4[-1, 3, C3, [512, False]],  # 20 (P4/16-medium)[-1, 1, Conv, [512, 3, 2]],[[-1, 10], 1, Concat, [1]],  # cat head P5[-1, 3, C3, [1024, False]],  # 23 (P5/32-large)[[17, 20, 23], 1, Detect, [nc]],  # Detect(P3, P4, P5)]

优化空间金字塔池化：SPPF / SimSPPF / ASPP / RFB / SPPCSPC 替换 SPP

修改三步：

把 XXX模块放入 common.py
yolo.py 放入类名
修改 yolov5.yaml

backbone:# [from, number, module, args][[-1, 1, Conv, [64, 6, 2, 2]],  # 0-P1/2[-1, 1, Conv, [128, 3, 2]],  # 1-P2/4[-1, 3, C3, [128]],[-1, 1, Conv, [256, 3, 2]],  # 3-P3/8[-1, 6, C3, [256]],[-1, 1, Conv, [512, 3, 2]],  # 5-P4/16[-1, 9, C3, [512]],[-1, 1, Conv, [1024, 3, 2]],  # 7-P5/32[-1, 3, C3, [1024]],[-1, 1, SPPF, [1024, 5]],  # 9# [-1, 1, ASPP, [512]],  # 9# [-1, 1, SPP, [1024]],# [-1, 1, SimSPPF, [1024, 5]],# [-1, 1, BasicRFB, [1024]],# [-1, 1, SPPCSPC, [1024]],# [-1, 1, SPPFCSPC, [1024, 5]], # 🍀]

SPP：

class SPP(nn.Module):# Spatial Pyramid Pooling (SPP) layer https://arxiv.org/abs/1406.4729def __init__(self, c1, c2, k=(5, 9, 13)):super().__init__()c_ = c1 // 2  # hidden channelsself.cv1 = Conv(c1, c_, 1, 1)self.cv2 = Conv(c_ * (len(k) + 1), c2, 1, 1)self.m = nn.ModuleList([nn.MaxPool2d(kernel_size=x, stride=1, padding=x // 2) for x in k])def forward(self, x):x = self.cv1(x)with warnings.catch_warnings():warnings.simplefilter('ignore')  # suppress torch 1.9.0 max_pool2d() warningreturn self.cv2(torch.cat([x] + [m(x) for m in self.m], 1))

SPPF：

class SPPF(nn.Module):# Spatial Pyramid Pooling - Fast (SPPF) layer for YOLOv5 by Glenn Jocherdef __init__(self, c1, c2, k=5):  # equivalent to SPP(k=(5, 9, 13))super().__init__()c_ = c1 // 2  # hidden channelsself.cv1 = Conv(c1, c_, 1, 1)self.cv2 = Conv(c_ * 4, c2, 1, 1)self.m = nn.MaxPool2d(kernel_size=k, stride=1, padding=k // 2)def forward(self, x):x = self.cv1(x)with warnings.catch_warnings():warnings.simplefilter('ignore')  # suppress torch 1.9.0 max_pool2d() warningy1 = self.m(x)y2 = self.m(y1)return self.cv2(torch.cat((x, y1, y2, self.m(y2)), 1))

SimSPPF：

class SimConv(nn.Module):'''Normal Conv with ReLU activation'''def __init__(self, in_channels, out_channels, kernel_size, stride, groups=1, bias=False):super().__init__()padding = kernel_size // 2self.conv = nn.Conv2d(in_channels,out_channels,kernel_size=kernel_size,stride=stride,padding=padding,groups=groups,bias=bias,)self.bn = nn.BatchNorm2d(out_channels)self.act = nn.ReLU()def forward(self, x):return self.act(self.bn(self.conv(x)))def forward_fuse(self, x):return self.act(self.conv(x))class SimSPPF(nn.Module):'''Simplified SPPF with ReLU activation'''def __init__(self, in_channels, out_channels, kernel_size=5):super().__init__()c_ = in_channels // 2  # hidden channelsself.cv1 = SimConv(in_channels, c_, 1, 1)self.cv2 = SimConv(c_ * 4, out_channels, 1, 1)self.m = nn.MaxPool2d(kernel_size=kernel_size, stride=1, padding=kernel_size // 2)def forward(self, x):x = self.cv1(x)with warnings.catch_warnings():warnings.simplefilter('ignore')y1 = self.m(x)y2 = self.m(y1)return self.cv2(torch.cat([x, y1, y2, self.m(y2)], 1))

ASPP：

# without BN version
class ASPP(nn.Module):def __init__(self, in_channel=512, out_channel=256):super(ASPP, self).__init__()self.mean = nn.AdaptiveAvgPool2d((1, 1))  # (1,1)means ouput_dimself.conv = nn.Conv2d(in_channel,out_channel, 1, 1)self.atrous_block1 = nn.Conv2d(in_channel, out_channel, 1, 1)self.atrous_block6 = nn.Conv2d(in_channel, out_channel, 3, 1, padding=6, dilation=6)self.atrous_block12 = nn.Conv2d(in_channel, out_channel, 3, 1, padding=12, dilation=12)self.atrous_block18 = nn.Conv2d(in_channel, out_channel, 3, 1, padding=18, dilation=18)self.conv_1x1_output = nn.Conv2d(out_channel * 5, out_channel, 1, 1)def forward(self, x):size = x.shape[2:]image_features = self.mean(x)image_features = self.conv(image_features)image_features = F.upsample(image_features, size=size, mode='bilinear')atrous_block1 = self.atrous_block1(x)atrous_block6 = self.atrous_block6(x)atrous_block12 = self.atrous_block12(x)atrous_block18 = self.atrous_block18(x)net = self.conv_1x1_output(torch.cat([image_features, atrous_block1, atrous_block6,atrous_block12, atrous_block18], dim=1))return net

RFB：

class BasicConv(nn.Module):def __init__(self, in_planes, out_planes, kernel_size, stride=1, padding=0, dilation=1, groups=1, relu=True, bn=True):super(BasicConv, self).__init__()self.out_channels = out_planesif bn:self.conv = nn.Conv2d(in_planes, out_planes, kernel_size=kernel_size, stride=stride, padding=padding, dilation=dilation, groups=groups, bias=False)self.bn = nn.BatchNorm2d(out_planes, eps=1e-5, momentum=0.01, affine=True)self.relu = nn.ReLU(inplace=True) if relu else Noneelse:self.conv = nn.Conv2d(in_planes, out_planes, kernel_size=kernel_size, stride=stride, padding=padding, dilation=dilation, groups=groups, bias=True)self.bn = Noneself.relu = nn.ReLU(inplace=True) if relu else Nonedef forward(self, x):x = self.conv(x)if self.bn is not None:x = self.bn(x)if self.relu is not None:x = self.relu(x)return xclass BasicRFB(nn.Module):def __init__(self, in_planes, out_planes, stride=1, scale=0.1, map_reduce=8, vision=1, groups=1):super(BasicRFB, self).__init__()self.scale = scaleself.out_channels = out_planesinter_planes = in_planes // map_reduceself.branch0 = nn.Sequential(BasicConv(in_planes, inter_planes, kernel_size=1, stride=1, groups=groups, relu=False),BasicConv(inter_planes, 2 * inter_planes, kernel_size=(3, 3), stride=stride, padding=(1, 1), groups=groups),BasicConv(2 * inter_planes, 2 * inter_planes, kernel_size=3, stride=1, padding=vision, dilation=vision, relu=False, groups=groups))self.branch1 = nn.Sequential(BasicConv(in_planes, inter_planes, kernel_size=1, stride=1, groups=groups, relu=False),BasicConv(inter_planes, 2 * inter_planes, kernel_size=(3, 3), stride=stride, padding=(1, 1), groups=groups),BasicConv(2 * inter_planes, 2 * inter_planes, kernel_size=3, stride=1, padding=vision + 2, dilation=vision + 2, relu=False, groups=groups))self.branch2 = nn.Sequential(BasicConv(in_planes, inter_planes, kernel_size=1, stride=1, groups=groups, relu=False),BasicConv(inter_planes, (inter_planes // 2) * 3, kernel_size=3, stride=1, padding=1, groups=groups),BasicConv((inter_planes // 2) * 3, 2 * inter_planes, kernel_size=3, stride=stride, padding=1, groups=groups),BasicConv(2 * inter_planes, 2 * inter_planes, kernel_size=3, stride=1, padding=vision + 4, dilation=vision + 4, relu=False, groups=groups))self.ConvLinear = BasicConv(6 * inter_planes, out_planes, kernel_size=1, stride=1, relu=False)self.shortcut = BasicConv(in_planes, out_planes, kernel_size=1, stride=stride, relu=False)self.relu = nn.ReLU(inplace=False)def forward(self, x):x0 = self.branch0(x)x1 = self.branch1(x)x2 = self.branch2(x)out = torch.cat((x0, x1, x2), 1)out = self.ConvLinear(out)short = self.shortcut(x)out = out * self.scale + shortout = self.relu(out)return out

SPPCSPC：

class SPPCSPC(nn.Module):# CSP https://github.com/WongKinYiu/CrossStagePartialNetworksdef __init__(self, c1, c2, n=1, shortcut=False, g=1, e=0.5, k=(5, 9, 13)):super(SPPCSPC, self).__init__()c_ = int(2 * c2 * e)  # hidden channelsself.cv1 = Conv(c1, c_, 1, 1)self.cv2 = Conv(c1, c_, 1, 1)self.cv3 = Conv(c_, c_, 3, 1)self.cv4 = Conv(c_, c_, 1, 1)self.m = nn.ModuleList([nn.MaxPool2d(kernel_size=x, stride=1, padding=x // 2) for x in k])self.cv5 = Conv(4 * c_, c_, 1, 1)self.cv6 = Conv(c_, c_, 3, 1)self.cv7 = Conv(2 * c_, c2, 1, 1)def forward(self, x):x1 = self.cv4(self.cv3(self.cv1(x)))y1 = self.cv6(self.cv5(torch.cat([x1] + [m(x1) for m in self.m], 1)))y2 = self.cv2(x)return self.cv7(torch.cat((y1, y2), dim=1))

优化训练策略：SIoU / EIoU / WIoU / Focal_xIoU / MPDIoU 替换 IoU

优化激活函数：SiLU、Hardswish、MemoryEfficientMish、FReLU、AconC、MetaAconC 替换 Mish函数

V5 自带的激活函数代码在：yolo5/utils/activations.py，需要换直接调用即可，不用自己写了：

import torch
import torch.nn as nn
import torch.nn.functional as Fclass SiLU(nn.Module):@staticmethoddef forward(x):return x * torch.sigmoid(x)class Hardswish(nn.Module):@staticmethoddef forward(x):return x * F.hardtanh(x + 3, 0.0, 6.0) / 6.0  # for TorchScript, CoreML and ONNXclass Mish(nn.Module):@staticmethoddef forward(x):return x * F.softplus(x).tanh()class MemoryEfficientMish(nn.Module):class F(torch.autograd.Function):@staticmethoddef forward(ctx, x):ctx.save_for_backward(x)return x.mul(torch.tanh(F.softplus(x)))  # x * tanh(ln(1 + exp(x)))@staticmethoddef backward(ctx, grad_output):x = ctx.saved_tensors[0]sx = torch.sigmoid(x)fx = F.softplus(x).tanh()return grad_output * (fx + x * sx * (1 - fx * fx))def forward(self, x):return self.F.apply(x)class FReLU(nn.Module):def __init__(self, c1, k=3):  # ch_in, kernelsuper().__init__()self.conv = nn.Conv2d(c1, c1, k, 1, 1, groups=c1, bias=False)self.bn = nn.BatchNorm2d(c1)def forward(self, x):return torch.max(x, self.bn(self.conv(x)))class AconC(nn.Module):def __init__(self, c1):super().__init__()self.p1 = nn.Parameter(torch.randn(1, c1, 1, 1))self.p2 = nn.Parameter(torch.randn(1, c1, 1, 1))self.beta = nn.Parameter(torch.ones(1, c1, 1, 1))def forward(self, x):dpx = (self.p1 - self.p2) * xreturn dpx * torch.sigmoid(self.beta * dpx) + self.p2 * xclass MetaAconC(nn.Module):def __init__(self, c1, k=1, s=1, r=16):  # ch_in, kernel, stride, rsuper().__init__()c2 = max(r, c1 // r)self.p1 = nn.Parameter(torch.randn(1, c1, 1, 1))self.p2 = nn.Parameter(torch.randn(1, c1, 1, 1))self.fc1 = nn.Conv2d(c1, c2, k, s, bias=True)self.fc2 = nn.Conv2d(c2, c1, k, s, bias=True)def forward(self, x):y = x.mean(dim=2, keepdims=True).mean(dim=3, keepdims=True)beta = torch.sigmoid(self.fc2(self.fc1(y)))  # bug patch BN layers removeddpx = (self.p1 - self.p2) * xreturn dpx * torch.sigmoid(beta * dpx) + self.p2 * x

修改网络中的激活函数：yolo5/models/common.py

class Conv(nn.Module):default_act = nn.SiLU()  # 默认激活函数，选择你要更换的激活函数def __init__(self, c1, c2, k=1, s=1, p=None, g=1, d=1, act=True):super().__init__()self.conv = nn.Conv2d(c1, c2, k, s, autopad(k, p, d), groups=g, dilation=d, bias=False)self.bn = nn.BatchNorm2d(c2)self.act = self.default_act if act is True else act if isinstance(act, nn.Module) else nn.Identity()

更换自己想要的激活函数：

default_act = nn.SiLU()  # 默认激活函数
default_act = nn.Identity()
default_act = nn.Tanh()
default_act = nn.Sigmoid()
default_act = nn.ReLU() 
default_act = nn.LeakyReLU(0.1)
default_act = nn.Hardswish() 
default_act = nn.SiLU() 
default_act = Mish()
default_act = FReLU(c2)
default_act = AconC(c2)
default_act = MetaAconC(c2) 
default_act = SiLU_beta(c2)
default_act = FReLU_noBN_biasFalse(c2)
default_act = FReLU_noBN_biasTrue(c2)

class BottleneckCSP(nn.Module):def __init__(self, c1, c2, n=1, shortcut=True, g=1, e=0.5):  # ch_in, ch_out, number, shortcut, groups, expansionsuper().__init__()c_ = int(c2 * e)  # hidden channelsself.cv1 = Conv(c1, c_, 1, 1)self.cv2 = nn.Conv2d(c1, c_, 1, 1, bias=False)self.cv3 = nn.Conv2d(c_, c_, 1, 1, bias=False)self.cv4 = Conv(2 * c_, c2, 1, 1)self.bn = nn.BatchNorm2d(2 * c_)  # applied to cat(cv2, cv3)self.act = nn.SiLU()   # 选择你要更换的激活函数

优化损失函数：多种类Loss, PolyLoss / VarifocalLoss / GFL / QualityFLoss / FL

优化损失函数：改进用于微小目标检测的 Normalized Gaussian Wasserstein Distance

引入 GSConv

修改三步：

把 XXX模块放入 common.py
yolo.py 放入类名
修改 yolov5.yaml

把 XXX模块放入 common.py：

# ---------------------------GSConv Begin---------------------------
class Conv_Mish(nn.Module):# Standard convolutiondef __init__(self, c1, c2, k=1, s=1, p=None, g=1, act=True):  # ch_in, ch_out, kernel, stride, padding, groupssuper().__init__()self.conv = nn.Conv2d(c1, c2, k, s, autopad(k, p), groups=g, bias=False)self.bn = nn.BatchNorm2d(c2)self.act = nn.Mish() if act else nn.Identity()def forward(self, x):return self.act(self.bn(self.conv(x)))def forward_fuse(self, x):return self.act(self.conv(x))class GSConv(nn.Module):# GSConv https://github.com/AlanLi1997/slim-neck-by-gsconvdef __init__(self, c1, c2, k=1, s=1, g=1, act=True):super().__init__()c_ = c2 // 2self.cv1 = Conv_Mish(c1, c_, k, s, None, g, act)self.cv2 = Conv_Mish(c_, c_, 5, 1, None, c_, act)def forward(self, x):x1 = self.cv1(x)x2 = torch.cat((x1, self.cv2(x1)), 1)# shuffle# y = x2.reshape(x2.shape[0], 2, x2.shape[1] // 2, x2.shape[2], x2.shape[3])# y = y.permute(0, 2, 1, 3, 4)# return y.reshape(y.shape[0], -1, y.shape[3], y.shape[4])b, n, h, w = x2.data.size()b_n = b * n // 2y = x2.reshape(b_n, 2, h * w)y = y.permute(1, 0, 2)y = y.reshape(2, -1, n // 2, h, w)return torch.cat((y[0], y[1]), 1)class GSConvns(GSConv):# GSConv with a normative-shuffle https://github.com/AlanLi1997/slim-neck-by-gsconvdef __init__(self, c1, c2, k=1, s=1, g=1, act=True):super().__init__(c1, c2, k=1, s=1, g=1, act=True)c_ = c2 // 2self.shuf = nn.Conv2d(c_ * 2, c2, 1, 1, 0, bias=False)def forward(self, x):x1 = self.cv1(x)x2 = torch.cat((x1, self.cv2(x1)), 1)# normative-shuffle, TRT supportedreturn nn.ReLU(self.shuf(x2))class GSBottleneck(nn.Module):# GS Bottleneck https://github.com/AlanLi1997/slim-neck-by-gsconvdef __init__(self, c1, c2, k=3, s=1, e=0.5):super().__init__()c_ = int(c2 * e)# for lightingself.conv_lighting = nn.Sequential(GSConv(c1, c_, 1, 1),GSConv(c_, c2, 3, 1, act=False))self.shortcut = Conv_Mish(c1, c2, 1, 1, act=False)def forward(self, x):return self.conv_lighting(x) + self.shortcut(x)class VoVGSCSP(nn.Module):# VoVGSCSP module with GSBottleneckdef __init__(self, c1, c2, n=1, shortcut=True, g=1, e=0.5):super().__init__()c_ = int(c2 * e)  # hidden channelsself.cv1 = Conv_Mish(c1, c_, 1, 1)self.cv2 = Conv_Mish(c1, c_, 1, 1)# self.gc1 = GSConv(c_, c_, 1, 1)# self.gc2 = GSConv(c_, c_, 1, 1)# self.gsb = GSBottleneck(c_, c_, 1, 1)self.gsb = nn.Sequential(*(GSBottleneck(c_, c_, e=1.0) for _ in range(n)))self.res = Conv_Mish(c_, c_, 3, 1, act=False)self.cv3 = Conv_Mish(2 * c_, c2, 1)  #def forward(self, x):x1 = self.gsb(self.cv1(x))y = self.cv2(x)return self.cv3(torch.cat((y, x1), dim=1))class GSBottleneckC(GSBottleneck):# cheap GS Bottleneck https://github.com/AlanLi1997/slim-neck-by-gsconvdef __init__(self, c1, c2, k=3, s=1):super().__init__(c1, c2, k, s)self.shortcut = DWConv(c1, c2, k, s, act=False)class VoVGSCSPC(VoVGSCSP):# cheap VoVGSCSP module with GSBottleneckdef __init__(self, c1, c2, n=1, shortcut=True, g=1, e=0.5):super().__init__(c1, c2)c_ = int(c2 * 0.5)  # hidden channelsself.gsb = GSBottleneckC(c_, c_, 1, 1)
# ---------------------------GSConv End---------------------------

yolo.py 放入类名:

 	if m in {Conv, GhostConv, Bottleneck, GhostBottleneck, SPP, SPPF, DWConv, MixConv2d, Focus, CrossConv,BottleneckCSP, C3, C3TR, C3SPP, C3Ghost, nn.ConvTranspose2d, DWConvTranspose2d, C3x, GSConvns, VoVGSCSP, VoVGSCSPC}:     # 添加 GSConvns, VoVGSCSP, VoVGSCSPCc1, c2 = ch[f], args[0]if c2 != no:  # if not outputc2 = make_divisible(c2 * gw, 8)args = [c1, c2, *args[1:]]if m in {BottleneckCSP, C3, C3TR, C3Ghost, C3x, VoVGSCSP, VoVGSCSPC}: # 添加 VoVGSCSP, VoVGSCSPCargs.insert(2, n)  # number of repeatsdef fuse(self):  # fuse model Conv2d() + BatchNorm2d() layersLOGGER.info('Fusing layers... ')for m in self.model.modules():if isinstance(m, (Conv, DWConv)) and hasattr(m, 'bn'):m.conv = fuse_conv_and_bn(m.conv, m.bn)  # update convdelattr(m, 'bn')  # remove batchnormm.forward = m.forward_fuse  # update forwarddef fuse(self):  # fuse model Conv2d() + BatchNorm2d() layersLOGGER.info('Fusing layers... ')for m in self.model.modules():if isinstance(m, (Conv, DWConv, Conv_Mish)) and hasattr(m, 'bn'):    # 添加 Conv_Mishm.conv = fuse_conv_and_bn(m.conv, m.bn)  # update convdelattr(m, 'bn')  # remove batchnormm.forward = m.forward_fuse  # update forward

修改 yolov5.yaml:

nc: 80  # number of classes
depth_multiple: 0.33  # model depth multiple
width_multiple: 0.50  # layer channel multiple
anchors:- [10,13, 16,30, 33,23]  # P3/8- [30,61, 62,45, 59,119]  # P4/16- [116,90, 156,198, 373,326]  # P5/32# YOLOv5 v6.0 backbone
backbone:# [from, number, module, args][[-1, 1, Conv, [64, 6, 2, 2]],  # 0-P1/2[-1, 1, Conv, [128, 3, 2]],  # 1-P2/4[-1, 3, C3, [128]],[-1, 1, Conv, [256, 3, 2]],  # 3-P3/8[-1, 6, C3, [256]],[-1, 1, Conv, [512, 3, 2]],  # 5-P4/16[-1, 9, C3, [512]],[-1, 1, Conv, [1024, 3, 2]],  # 7-P5/32[-1, 3, C3, [1024]],[-1, 1, SPPF, [1024, 5]],  # 9]# YOLOv5 v6.0 head
head:[[-1, 1, GSConv, [512, 1, 1]],[-1, 1, nn.Upsample, [None, 2, 'nearest']],[[-1, 6], 1, Concat, [1]],  # cat backbone P4[-1, 3, C3, [512, False]],  # 13[-1, 1, GSConv, [256, 1, 1]],[-1, 1, nn.Upsample, [None, 2, 'nearest']],[[-1, 4], 1, Concat, [1]],  # cat backbone P3[-1, 3, C3, [256, False]],  # 17 (P3/8-small)[-1, 1, GSConv, [256, 3, 2]],[[-1, 14], 1, Concat, [1]],  # cat head P4[-1, 3, C3, [512, False]],  # 20 (P4/16-medium)[-1, 1, GSConv, [512, 3, 2]],[[-1, 10], 1, Concat, [1]],  # cat head P5[-1, 3, C3, [1024, False]],  # 23 (P5/32-large)[[17, 20, 23], 1, Detect, [nc, anchors]],  # Detect(P3, P4, P5)]

引入特征融合网络 BiFPN：提高检测精度和效率

修改三步：

把 XXX模块放入 common.py
yolo.py 放入类名
修改 yolov5.yaml

添加到 common.py 文件：

# BiFPN 两个特征图add操作
class BiFPN_Add2(nn.Module):def __init__(self, c1, c2):super(BiFPN_Add2, self).__init__()# 设置可学习参数 nn.Parameter的作用是：将一个不可训练的类型Tensor转换成可以训练的类型parameter# 并且会向宿主模型注册该参数 成为其一部分 即model.parameters()会包含这个parameter# 从而在参数优化的时候可以自动一起优化self.w = nn.Parameter(torch.ones(2, dtype=torch.float32), requires_grad=True)self.epsilon = 0.0001self.conv = nn.Conv2d(c1, c2, kernel_size=1, stride=1, padding=0)self.silu = nn.SiLU()def forward(self, x):w = self.wweight = w / (torch.sum(w, dim=0) + self.epsilon)return self.conv(self.silu(weight[0] * x[0] + weight[1] * x[1]))# 三个特征图add操作
class BiFPN_Add3(nn.Module):def __init__(self, c1, c2):super(BiFPN_Add3, self).__init__()self.w = nn.Parameter(torch.ones(3, dtype=torch.float32), requires_grad=True)self.epsilon = 0.0001self.conv = nn.Conv2d(c1, c2, kernel_size=1, stride=1, padding=0)self.silu = nn.SiLU()def forward(self, x):w = self.wweight = w / (torch.sum(w, dim=0) + self.epsilon)  # Fast normalized fusionreturn self.conv(self.silu(weight[0] * x[0] + weight[1] * x[1] + weight[2] * x[2]))

修改 yolo.py 的 parse_model：

def parse_model(d, ch):  elif m is Concat:c2 = sum(ch[x] for x in f)elif m in [BiFPN_Add2, BiFPN_Add3]:     # 在 Concat 后，添加 BiFPN 结构c2 = max([ch[x] for x in f)

添加 ultralytics/yolo5/train.py ，导入 BiFPN_Add3, BiFPN_Add2：

from models.common import BiFPN_Add3, BiFPN_Add2

将 BiFPN_Add2, BiFPN_Add3 的参数 w 加入 g1：

    g0, g1, g2 = [], [], []  # optimizer parameter groupsfor v in model.modules():······# BiFPN_Concatelif isinstance(v, BiFPN_Add2) and hasattr(v, 'w') and isinstance(v.w, nn.Parameter):g1.append(v.w)elif isinstance(v, BiFPN_Add3) and hasattr(v, 'w') and isinstance(v.w, nn.Parameter):g1.append(v.w)

修改 yolov5.yaml 的 Concat 换成 BiFPN_Add：

# Parameters
nc: 80  # number of classes
depth_multiple: 0.33  # model depth multiple
width_multiple: 0.50  # layer channel multiple
anchors:- [10,13, 16,30, 33,23]  # P3/8- [30,61, 62,45, 59,119]  # P4/16- [116,90, 156,198, 373,326]  # P5/32# YOLOv5 v6.0 backbone
backbone:# [from, number, module, args][[-1, 1, Conv, [64, 6, 2, 2]],  # 0-P1/2[-1, 1, Conv, [128, 3, 2]],  # 1-P2/4[-1, 3, C3, [128]],[-1, 1, Conv, [256, 3, 2]],  # 3-P3/8[-1, 6, C3, [256]],[-1, 1, Conv, [512, 3, 2]],  # 5-P4/16[-1, 9, C3, [512]],[-1, 1, Conv, [1024, 3, 2]],  # 7-P5/32[-1, 3, C3, [1024]],[-1, 1, SPPF, [1024, 5]],  # 9]# YOLOv5 v6.1 BiFPN head
head:[[-1, 1, Conv, [512, 1, 1]],[-1, 1, nn.Upsample, [None, 2, 'nearest']],[[-1, 6], 1, BiFPN_Add2, [256, 256]],  # cat backbone P4[-1, 3, C3, [512, False]],  # 13[-1, 1, Conv, [256, 1, 1]],[-1, 1, nn.Upsample, [None, 2, 'nearest']],[[-1, 4], 1, BiFPN_Add2, [128, 128]],  # cat backbone P3[-1, 3, C3, [256, False]],  # 17 [-1, 1, Conv, [512, 3, 2]],  [[-1, 13, 6], 1, BiFPN_Add3, [256, 256]],  #v5s通道数是默认参数的一半[-1, 3, C3, [512, False]],  # 20 [-1, 1, Conv, [512, 3, 2]],[[-1, 10], 1, BiFPN_Add2, [256, 256]],  # cat head P5[-1, 3, C3, [1024, False]],  # 23 [[17, 20, 23], 1, Detect, [nc, anchors]],  # Detect(P3, P4, P5)]

引入 YOLOv6 颈部 BiFusion Neck

引入注意力机制：在 C3 模块添加添加注意力机制

添加【SE】【CBAM】【 ECA 】【CA】

添加【SimAM】【CoTAttention】【SKAttention】【DoubleAttention】

添加【EffectiveSE】【GlobalContext】【GatherExcite】【MHSA】

添加【Triplet】【SpatialGroupEnhance】【NAM】【S2】

引入小目标检测：用于低分辨率图像和小物体的新 CNN 模块SPD-Conv

修改三步：

把 XXX模块放入 common.py
yolo.py 放入类名
修改 yolov5.yaml

把 XXX模块放入 common.py：

class space_to_depth(nn.Module):# Changing the dimension of the Tensordef __init__(self, dimension=1):super().__init__()self.d = dimensiondef forward(self, x):return torch.cat([x[..., ::2, ::2], x[..., 1::2, ::2], x[..., ::2, 1::2], x[..., 1::2, 1::2]], 1)

yolo.py 放入类名：

elif m is Contract: c2 = ch[f] * args[0] ** 2
elif m is space_to_depth:          # 在 Contract 后面加入 space_to_depthc2 = 4 * ch[f]

修改 yolov5.yaml：

# Parameters
nc: 80  # number of classes
depth_multiple: 0.33  # model depth multiple
width_multiple: 0.50  # layer channel multiple
anchors:- [10,13, 16,30, 33,23]  # P3/8- [30,61, 62,45, 59,119]  # P4/16- [116,90, 156,198, 373,326]  # P5/32# YOLOv5 v6.0 backbone
backbone:# [from, number, module, args][[-1, 1, Focus, [64, 3]],     # 0-P1/2[-1, 1, Conv, [128, 3, 1]],  # 1[-1,1,space_to_depth,[1]],   # 2 -P2/4[-1, 3, C3, [128]],          # 3[-1, 1, Conv, [256, 3, 1]],  # 4[-1,1,space_to_depth,[1]],   # 5 -P3/8[-1, 6, C3, [256]],          # 6[-1, 1, Conv, [512, 3, 1]],  # 7-P4/16[-1,1,space_to_depth,[1]],   # 8 -P4/16[-1, 9, C3, [512]],          # 9[-1, 1, Conv, [1024, 3, 1]], # 10-P5/32[-1,1,space_to_depth,[1]],   # 11 -P5/32[-1, 3, C3, [1024]],         # 12[-1, 1, SPPF, [1024, 5]],    # 13]# YOLOv5 v6.0 head
head:[[-1, 1, Conv, [512, 1, 1]],                    # 14[-1, 1, nn.Upsample, [None, 2, 'nearest']],    # 15[[-1, 9], 1, Concat, [1]],                     # 16 cat backbone P4[-1, 3, C3, [512, False]],                     # 17[-1, 1, Conv, [256, 1, 1]],                    # 18[-1, 1, nn.Upsample, [None, 2, 'nearest']],    # 19[[-1, 6], 1, Concat, [1]],                     # 20 cat backbone P3[-1, 3, C3, [256, False]],                     # 21 (P3/8-small)[-1, 1, Conv, [256, 3, 1]],                    # 22[-1,1,space_to_depth,[1]],                     # 23 -P2/4[[-1, 18], 1, Concat, [1]],                    # 24 cat head P4[-1, 3, C3, [512, False]],                     # 25 (P4/16-medium)[-1, 1, Conv, [512, 3, 1]],                    # 26[-1,1,space_to_depth,[1]],                     # 27 -P2/4[[-1, 14], 1, Concat, [1]],                    # 28 cat head P5[-1, 3, C3, [1024, False]],                    # 29 (P5/32-large)[[21, 25, 29], 1, Detect, [nc, anchors]],  # Detect(P3, P4, P5)]

引入轻量化卷积替换传统卷积

引入独立注意力 FPN + PAN 结构替换传统卷积

修改三步：

把 XXX模块放入 common.py
yolo.py 放入类名
修改 yolov5.yaml

把 XXX模块放入 common.py：

class AttentionConv(nn.Module):def __init__(self, in_channels, out_channels, kernel_size, stride=1, padding=1, groups=1, bias=False):super(AttentionConv, self).__init__()self.out_channels = out_channelsself.kernel_size = kernel_sizeself.stride = strideself.padding = paddingself.groups = groupsassert self.out_channels % self.groups == 0, "out_channels should be divided by groups. (example: out_channels: 40, groups: 4)"self.rel_h = nn.Parameter(torch.randn(out_channels // 2, 1, 1, kernel_size, 1), requires_grad=True)self.rel_w = nn.Parameter(torch.randn(out_channels // 2, 1, 1, 1, kernel_size), requires_grad=True)self.key_conv = nn.Conv2d(in_channels, out_channels, kernel_size=1, bias=bias)self.query_conv = nn.Conv2d(in_channels, out_channels, kernel_size=1, bias=bias)self.value_conv = nn.Conv2d(in_channels, out_channels, kernel_size=1, bias=bias)self.reset_parameters()def forward(self, x):batch, channels, height, width = x.size()padded_x = F.pad(x, [self.padding, self.padding, self.padding, self.padding])q_out = self.query_conv(x)k_out = self.key_conv(padded_x)v_out = self.value_conv(padded_x)k_out = k_out.unfold(2, self.kernel_size, self.stride).unfold(3, self.kernel_size, self.stride)v_out = v_out.unfold(2, self.kernel_size, self.stride).unfold(3, self.kernel_size, self.stride)k_out_h, k_out_w = k_out.split(self.out_channels // 2, dim=1)k_out = torch.cat((k_out_h + self.rel_h, k_out_w + self.rel_w), dim=1)k_out = k_out.contiguous().view(batch, self.groups, self.out_channels // self.groups, height, width, -1)v_out = v_out.contiguous().view(batch, self.groups, self.out_channels // self.groups, height, width, -1)q_out = q_out.view(batch, self.groups, self.out_channels // self.groups, height, width, 1)out = q_out * k_outout = F.softmax(out, dim=-1)out = torch.einsum('bnchwk,bnchwk -> bnchw', out, v_out).view(batch, -1, height, width)return outdef reset_parameters(self):init.kaiming_normal_(self.key_conv.weight, mode='fan_out', nonlinearity='relu')init.kaiming_normal_(self.value_conv.weight, mode='fan_out', nonlinearity='relu')init.kaiming_normal_(self.query_conv.weight, mode='fan_out', nonlinearity='relu')init.normal_(self.rel_h, 0, 1)init.normal_(self.rel_w, 0, 1)class AttentionStem(nn.Module):def __init__(self, in_channels, out_channels, kernel_size, stride=1, padding=0, groups=1, m=4, bias=False):super(AttentionStem, self).__init__()self.out_channels = out_channelsself.kernel_size = kernel_sizeself.stride = strideself.padding = paddingself.groups = groupsself.m = massert self.out_channels % self.groups == 0, "out_channels should be divided by groups. (example: out_channels: 40, groups: 4)"self.emb_a = nn.Parameter(torch.randn(out_channels // groups, kernel_size), requires_grad=True)self.emb_b = nn.Parameter(torch.randn(out_channels // groups, kernel_size), requires_grad=True)self.emb_mix = nn.Parameter(torch.randn(m, out_channels // groups), requires_grad=True)self.key_conv = nn.Conv2d(in_channels, out_channels, kernel_size=1, bias=bias)self.query_conv = nn.Conv2d(in_channels, out_channels, kernel_size=1, bias=bias)self.value_conv = nn.ModuleList([nn.Conv2d(in_channels, out_channels, kernel_size=1, bias=bias) for _ in range(m)])self.reset_parameters()def forward(self, x):batch, channels, height, width = x.size()padded_x = F.pad(x, [self.padding, self.padding, self.padding, self.padding])q_out = self.query_conv(x)k_out = self.key_conv(padded_x)v_out = torch.stack([self.value_conv[_](padded_x) for _ in range(self.m)], dim=0)k_out = k_out.unfold(2, self.kernel_size, self.stride).unfold(3, self.kernel_size, self.stride)v_out = v_out.unfold(3, self.kernel_size, self.stride).unfold(4, self.kernel_size, self.stride)k_out = k_out[:, :, :height, :width, :, :]v_out = v_out[:, :, :, :height, :width, :, :]emb_logit_a = torch.einsum('mc,ca->ma', self.emb_mix, self.emb_a)emb_logit_b = torch.einsum('mc,cb->mb', self.emb_mix, self.emb_b)emb = emb_logit_a.unsqueeze(2) + emb_logit_b.unsqueeze(1)emb = F.softmax(emb.view(self.m, -1), dim=0).view(self.m, 1, 1, 1, 1, self.kernel_size, self.kernel_size)v_out = emb * v_outk_out = k_out.contiguous().view(batch, self.groups, self.out_channels // self.groups, height, width, -1)v_out = v_out.contiguous().view(self.m, batch, self.groups, self.out_channels // self.groups, height, width, -1)v_out = torch.sum(v_out, dim=0).view(batch, self.groups, self.out_channels // self.groups, height, width, -1)q_out = q_out.view(batch, self.groups, self.out_channels // self.groups, height, width, 1)out = q_out * k_outout = F.softmax(out, dim=-1)out = torch.einsum('bnchwk,bnchwk->bnchw', out, v_out).view(batch, -1, height, width)return outdef reset_parameters(self):init.kaiming_normal_(self.key_conv.weight, mode='fan_out', nonlinearity='relu')init.kaiming_normal_(self.query_conv.weight, mode='fan_out', nonlinearity='relu')for _ in self.value_conv:init.kaiming_normal_(_.weight, mode='fan_out', nonlinearity='relu')init.normal_(self.emb_a, 0, 1)init.normal_(self.emb_b, 0, 1)init.normal_(self.emb_mix, 0, 1)

yolo.py 放入类名：

 if m in {Conv, GhostConv, Bottleneck, GhostBottleneck, SPP, SPPF, DWConv, MixConv2d, Focus, CrossConv,BottleneckCSP, C3, C3TR, C3SPP, C3Ghost, nn.ConvTranspose2d, DWConvTranspose2d, C3x, AttentionConv, AttentionStem}:  # AttentionConv, AttentionStem

修改 yolov5.yaml：

# Parameters
nc: 80  # number of classes
depth_multiple: 0.33  # model depth multiple
width_multiple: 0.50  # layer channel multiple
anchors:- [10,13, 16,30, 33,23]  # P3/8- [30,61, 62,45, 59,119]  # P4/16- [116,90, 156,198, 373,326]  # P5/32# YOLOv5 v6.0 backbone
backbone:# [from, number, module, args][[-1, 1, Conv, [64, 6, 2, 2]],  # 0-P1/2[-1, 1, Conv, [128, 3, 2]],  # 1-P2/4[-1, 3, C3, [128]],[-1, 1, Conv, [256, 3, 2]],  # 3-P3/8[-1, 6, C3, [256]],[-1, 1, Conv, [512, 3, 2]],  # 5-P4/16[-1, 9, C3, [512]],[-1, 1, Conv, [1024, 3, 2]],  # 7-P5/32[-1, 3, C3, [1024]],[-1, 1, SPPF, [1024, 5]],  # 9]# YOLOv5 v6.0 head
head:[ [ -1, 1, AttentionConv, [ 512, 3, 1, 1 ] ],[ -1, 1, nn.Upsample, [ None, 2, 'nearest' ] ],[ [ -1, 6 ], 1, Concat, [ 1 ] ],  # cat backbone P4[ -1, 1, AttentionConv, [ 512, 3, 1, 1 ] ] , # 13[ -1, 1, AttentionConv, [ 256, 3, 1, 1 ] ],[ -1, 1, nn.Upsample, [ None, 2, 'nearest' ] ],[ [ -1, 4 ], 1, Concat, [ 1 ] ],  # cat backbone P3[ -1, 1, AttentionConv, [ 256, 3, 1, 1 ] ],  # 17 (P3/8-small)[-1, 1, Conv, [256, 3, 2]],[[-1, 14], 1, Concat, [1]],  # cat head P4[-1, 3, AttentionConv, [512, 3, 1, 1]],  # 20 (P4/16-medium)[-1, 1, Conv, [512, 3, 2]],[[-1, 10], 1, Concat, [1]],  # cat head P5[-1, 3, AttentionConv, [1024, 3, 1, 1]],  # 23 (P5/32-large)[[17, 20, 23], 1, Detect, [nc, anchors]],  # Detect(P3, P4, P5)]

引入 YOLOX 解耦头

yolo.py 添加：

class DecoupledHead(nn.Module):def __init__(self, ch=256, nc=80, width=1.0, anchors=()):super().__init__()self.nc = nc  # number of classesself.nl = len(anchors)  # number of detection layers 3self.na = len(anchors[0]) // 2  # number of anchors 3self.merge = Conv(ch, 256 * width, 1, 1)self.cls_convs1 = Conv(256 * width, 256 * width, 3, 1, 1)self.cls_convs2 = Conv(256 * width, 256 * width, 3, 1, 1)self.reg_convs1 = Conv(256 * width, 256 * width, 3, 1, 1)self.reg_convs2 = Conv(256 * width, 256 * width, 3, 1, 1)self.cls_preds = nn.Conv2d(256 * width, self.nc * self.na, 1)self.reg_preds = nn.Conv2d(256 * width, 4 * self.na, 1)self.obj_preds = nn.Conv2d(256 * width, 1 * self.na, 1)def forward(self, x):x = self.merge(x)# 分类=3x3conv + 3x3conv + 1x1convpredx1 = self.cls_convs1(x)x1 = self.cls_convs2(x1)x1 = self.cls_preds(x1)# 回归=3x3conv（共享） + 3x3conv（共享） + 1x1predx2 = self.reg_convs1(x)x2 = self.reg_convs2(x2)x21 = self.reg_preds(x2)# 置信度=3x3conv（共享）+ 3x3conv（共享） + 1x1predx22 = self.obj_preds(x2)out = torch.cat([x21, x22, x1], 1)return out

class Detect(nn.Module):def __init__(self, nc=80, anchors=(), ch=(), inplace=True):  # detection layerself.m = nn.ModuleList(DecoupledHead(x, self.no * self.na, 1) for x in ch)  # DecoupledHead 换成 nn.Conv2d

添加俩行：

class Detect(nn.Module):def __init__(self, nc=80, anchors=(), ch=(), inplace=True, Decoupled=False):  # 添加：Decoupled=False ······self.decoupled = Decoupled       # 添加：self.decoupled = Decoupled

修改yaml文件，最后一行加 true：

# Parameters
nc: 80  # number of classes
depth_multiple: 0.33  # model depth multiple
width_multiple: 0.50  # layer channel multiple
anchors:- [10,13, 16,30, 33,23]  # P3/8- [30,61, 62,45, 59,119]  # P4/16- [116,90, 156,198, 373,326]  # P5/32# YOLOv5 v6.1 backbone
backbone:# [from, number, module, args][[-1, 1, Conv, [64, 6, 2, 2]],  # 0-P1/2[-1, 1, Conv, [128, 3, 2]],  # 1-P2/4[-1, 3, C3, [128]],[-1, 1, Conv, [256, 3, 2]],  # 3-P3/8[-1, 6, C3, [256]],[-1, 1, Conv, [512, 3, 2]],  # 5-P4/16[-1, 9, C3, [512]],[-1, 1, Conv, [1024, 3, 2]],  # 7-P5/32[-1, 3, C3, [1024]],[-1, 1, SPPF, [1024, 5]],  # 9]# YOLOv5 v6.0 head
head:[[-1, 1, Conv, [512, 1, 1]],[-1, 1, nn.Upsample, [None, 2, 'nearest']],[[-1, 6], 1, Concat, [1]],  # cat backbone P4[-1, 3, C3, [512, False]],  # 13[-1, 1, Conv, [256, 1, 1]],[-1, 1, nn.Upsample, [None, 2, 'nearest']],[[-1, 4], 1, Concat, [1]],  # cat backbone P3[-1, 3, C3, [256, False]],  # 17 (P3/8-small)[-1, 1, Conv, [256, 3, 2]],[[-1, 14], 1, Concat, [1]],  # cat head P4[-1, 3, C3, [512, False]],  # 20 (P4/16-medium)[-1, 1, Conv, [512, 3, 2]],[[-1, 10], 1, Concat, [1]],  # cat head P5[-1, 3, C3, [1024, False]],  # 23 (P5/32-large)[[17, 20, 23], 1, Detect, [nc, anchors,True]],  # Detect(P3, P4, P5)]

引入 YOLOv8 的 C2f 模块

修改三步：

把 XXX模块放入 common.py
yolo.py 放入类名
修改 yolov5.yaml

把 XXX模块放入 common.py：

class v8_Bottleneck(nn.Module):# Standard bottleneckdef __init__(self, c1, c2, shortcut=True, g=1, k=(3, 3), e=0.5):  # ch_in, ch_out, shortcut, groups, kernels, expandsuper().__init__()c_ = int(c2 * e)  # hidden channelsself.cv1 = Conv(c1, c_, k[0], 1)self.cv2 = Conv(c_, c2, k[1], 1, g=g)self.add = shortcut and c1 == c2def forward(self, x):return x + self.cv2(self.cv1(x)) if self.add else self.cv2(self.cv1(x))class C2f(nn.Module):# CSP Bottleneck with 2 convolutionsdef __init__(self, c1, c2, n=1, shortcut=False, g=1, e=0.5):  # ch_in, ch_out, number, shortcut, groups, expansionsuper().__init__()self.c = int(c2 * e)  # hidden channelsself.cv1 = Conv(c1, 2 * self.c, 1, 1)self.cv2 = Conv((2 + n) * self.c, c2, 1)  # optional act=FReLU(c2)self.m = nn.ModuleList(v8_Bottleneck(self.c, self.c, shortcut, g, k=((3, 3), (3, 3)), e=1.0) for _ in range(n))def forward(self, x):y = list(self.cv1(x).split((self.c, self.c), 1))y.extend(m(y[-1]) for m in self.m)return self.cv2(torch.cat(y, 1))

yolo.py 放入 C2F：

 if m in {Conv, GhostConv, Bottleneck, GhostBottleneck, SPP, SPPF, DWConv, MixConv2d, Focus, CrossConv,BottleneckCSP, C3, C3TR, C3SPP, C3Ghost, nn.ConvTranspose2d, DWConvTranspose2d, C3x, CARAFE, C2F}:  if m in {BottleneckCSP, C3, C3TR, C3Ghost, C3x, C2F}:args.insert(2, n)  # number of repeats

修改配置文件：

# YOLOv5 🚀 by Ultralytics, GPL-3.0 license# Parameters
nc: 80  # number of classes
depth_multiple: 0.33  # model depth multiple
width_multiple: 0.50  # layer channel multiple
anchors:- [10,13, 16,30, 33,23]  # P3/8- [30,61, 62,45, 59,119]  # P4/16- [116,90, 156,198, 373,326]  # P5/32# YOLOv5 v6.0 backbone
backbone:# [from, number, module, args][[-1, 1, Conv, [64, 3, 2 ]],  # 0-P1/2[-1, 1, Conv, [128, 3, 2]],  # 1-P2/4[-1, 3, C2f, [128, True]],[-1, 1, Conv, [256, 3, 2]],  # 3-P3/8[-1, 6, C2f, [256, True]],[-1, 1, Conv, [512, 3, 2]],  # 5-P4/16[-1, 6, C2f, [512, True]],[-1, 1, Conv, [1024, 3, 2]],  # 7-P5/32[-1, 3, C2f, [1024, True]],[-1, 1, SPPF, [1024]]]# YOLOv5 v6.0 head
head:[[-1, 1, Conv, [512, 1, 1]],[-1, 1, nn.Upsample, [None, 2, 'nearest']],[[-1, 6], 1, Concat, [1]],  # cat backbone P4[-1, 3, C3, [512, False]],  # 13[-1, 1, Conv, [256, 1, 1]],[-1, 1, nn.Upsample, [None, 2, 'nearest']],[[-1, 4], 1, Concat, [1]],  # cat backbone P3[-1, 3, C3, [256, False]],  # 17 (P3/8-small)[-1, 1, Conv, [256, 3, 2]],[[-1, 14], 1, Concat, [1]],  # cat head P4[-1, 3, C3, [512, False]],  # 20 (P4/16-medium)[-1, 1, Conv, [512, 3, 2]],[[-1, 10], 1, Concat, [1]],  # cat head P5[-1, 3, C3, [1024, False]],  # 23 (P5/32-large)[[17, 20, 23], 1, Detect, [nc, anchors]],  # Detect(P3, P4, P5)]