做电脑网站用什么软件好用找客源免费用哪个软件好

目录

环境：

一、配置RS

1、安装常见软件

2、配置web服务 

3、添加vip

4、arp抑制

二、配置LVS

1、添加vip

2、安装配置工具

3、配置DR

三、测试

四、脚本方式配置

1、LVS-DR

2、LVS-RS

---

环境：

master          lvs      192.168.80.161

node1           rs1     192.168.80.162

node2           rs2     192.168.80.163

VIP：192.168.80.10/32

一、配置RS

1、安装常见软件

yum install vim bash-completion wget tar net-tools lrzsz tree unzip psmisc dos2unix -y

2、配置web服务 

yum install nginx -y        
cd /usr/share/nginx/heml/
mv index.html index.html.bak
echo "web test page, ip is `hostname -I`." > index.html  #修改默认主页
systemctl start nginx

3、添加vip

ifconfig lo:20 192.168.80.10 netmask 255.255.255.255

4、arp抑制

echo "1" > /proc/sys/net/ipv4/conf/lo/arp_ignore
echo "2" > /proc/sys/net/ipv4/conf/lo/arp_announce
echo "1" > /proc/sys/net/ipv4/conf/all/arp_ignore
echo "2" > /proc/sys/net/ipv4/conf/all/arp_announce

二、配置LVS

1、添加vip

ifconfig lo:20 192.168.80.10 netmask 255.255.255.255

2、安装配置工具

yum install ipvsadm -y

3、配置DR

ipvsadm -A -t 192.168.80.10:80 -s rr
ipvsadm -a -t 192.168.80.10:80 -r 192.168.80.162
ipvsadm -a -t 192.168.80.10:80 -r 192.168.80.163【相关参数】   
-A 添加虚拟服务器
-t 设置集群地址（vip） 
-s 指定负载调度算法
-a 添加真实服务器
-d 删除真实服务器
-r 指定真实服务器
-m 使用nat模式：-g、-i分别对应DR、TUN模式
-w 为节点服务器设置权重，默认为1保存：
ipvsadm -Sn > /etc/sysconfig/ipvsadm

三、测试

四、脚本方式配置

1、LVS-DR

vim /etc/init.d/LVS_DR#!/bin/sh
#chkconfig: 2345 80 90
#description:auto_run
LOCK=/var/lock/ipvsadm.lock
VIP=192.168.80.10
RIP1=192.168.80.162
RIP2=192.168.80.163
DipName=ens33. /etc/rc.d/init.d/functions
start(){PID=`ipvsadm -Ln | grep ${VIP} | wc -l`if [ $PID -gt 0 ]thenecho "The LVS-DR Server is already running!"else/sbin/ifconfig ${DipName}:20 $VIP broadcast $VIP netmask 255.255.255.255 up/sbin/route add -host $VIP dev ${DipName}:20/sbin/ipvsadm -C/sbin/ipvsadm -At $VIP:80 -s rr/sbin/ipvsadm -at $VIP:80 -r  $RIP1:80 -g/sbin/ipvsadm -at $VIP:80 -r  $RIP2:80 -g/bin/touch $LOCKecho "starting LVS-DR Server is ok!"fi}stop(){/sbin/ipvsadm -C/sbin/route del -host $VIP dev ${DipName}:20/sbin/ifconfig ${DipName}:20 down > /dev/nullrm -rf $LOCKecho "stopping LVS-DR server is ok !"
}status(){if [ -e $LOCK ];thenecho "The LVS-DR Server is already running !"elseecho "The LVS-DR Server is not running !"fi
}case "$1" instart)start;;stop)stop;;restart)stopstart;;status)status;;
*)echo "Usage: $1 {start|stop|restart|status}"exit 1
esac
exit 0chmod +x  /etc/init.d/LVS_DR
chkconfig --add /etc/init.d/LVS_DR

2、LVS-RS

vim /etc/init.d/LVS_RS#!/bin/sh
#chkconfig: 2345 80 90
#description:auto_run
LOCK=/var/lock/ipvsadm.lock
VIP=192.168.80.10
DipName=lo
. /etc/rc.d/init.d/functions
start(){PID=`ifconfig | grep ${DipName}:20 | wc -l`if [ $PID -ne 0 ]thenecho "The LVS-DR-RIP Server is already running!"else/sbin/ifconfig ${DipName}:20 $VIP broadcast $VIP netmask 255.255.255.255 up/sbin/route add -host $VIP dev ${DipName}:20echo "1" > /proc/sys/net/ipv4/conf/lo/arp_ignoreecho "2" > /proc/sys/net/ipv4/conf/lo/arp_announceecho "1" > /proc/sys/net/ipv4/conf/all/arp_ignoreecho "2" > /proc/sys/net/ipv4/conf/all/arp_announce/bin/touch $LOCKecho "starting LVS-DR-RIP Server is ok!"fi}stop(){/sbin/route del -host $VIP dev ${DipName}:20/sbin/ifconfig ${DipName}:20 down > /dev/nullecho "0" > /proc/sys/net/ipv4/conf/lo/arp_ignoreecho "0" > /proc/sys/net/ipv4/conf/lo/arp_announceecho "0" > /proc/sys/net/ipv4/conf/all/arp_ignoreecho "0" > /proc/sys/net/ipv4/conf/all/arp_announcerm -rf $LOCKecho "stopping LVS-DR-RIP server is ok !"
}status(){if [ -e $LOCK ];thenecho "The LVS-DR Server is already running !"elseecho "The LVS-DR Server is not running !"fi
}case "$1" instart)start;;stop)stop;;restart)stopstart;;status)status;;
*)echo "Usage: $1 {start|stop|restart|status}"exit 1
esac
exit 0chmod +x /etc/init.d/LVS_RS 
chkconfig --add /etc/init.d/LVS_RS