电子商务动态网站开发新手怎么入行seo
环境：CentOS7
内存：8g(内存过少编译osg时会出现内存不足导致编译失败的情况，内存设置为4G时失败了，我直接加到了8g，所以就以8g为准了)
- 安装和配置vcpkg
cd ~/
git clone https://www.github.com/microsoft/vcpkg
cd vcpkg/
./bootstrap-vcpkg.sh # 这一步将生成二进制文件 `/vcpkg/vcpkg
sudo ln -s ~/vcpkg/vcpkg /usr/bin/vcpkg # 这一步是创建软连接，让你在shell中能直接使用vcpkg命令
export VCPKG_DEFAULT_TRIPLET=x64-linux #设置环境变量：vcpkg默认的三元组，保证安装的包是64位的
- 升级git
git --version #git 版本至少为2.7.4
sudo yum -y remove git
sudo yum -y install https://packages.endpointdev.com/rhel/7/os/x86_64/endpoint-repo.x86_64.rpm
sudo yum -y install git
git --verison
- 安装osg
- 安装编译osg时需要的依赖
#安装python3yum install zlib-devel bzip2-devel openssl-devel ncurses-devel sqlite-devel readline-devel tk-devel gcc make libffi-devel #安装编译 Python3的相关包
# 添加 epel 扩展源
yum -y install epel-release
# 安装 pip
yum install python-pip
# 安装pip3，也可以不安装
yum install -y python3-pip
pip install wget
# 从华为云镜像站下载
wget https://mirrors.huaweicloud.com/python/3.7.2/Python-3.7.2.tgz
# 解压缩
tar -zxvf Python-3.7.2.tgz
# 进入解压后的目录
cd Python-3.7.2
# 依次执行下面命令进行手动编译
./configure prefix=/usr/local/python3
make && make install
# 删除原来的 python 软链接
rm /usr/bin/python
# 添加 python 的软链接
ln -s /usr/local/python3/bin/python3.7 /usr/bin/python
# 添加 python3 的软链接，必须链接到'/usr/bin/python3'，不能时python3.7或者其他的，一会编译osg的依赖时会寻找python3，且是根据名称寻找
ln -s /usr/local/python3/bin/python3.7 /usr/bin/python3
# 添加 pip3 的软链接
ln -s /usr/local/python3/bin/pip3.7 /usr/bin/pip3.7
# 测试是否安装成功了
python -V
vi /usr/bin/yum
# 把 #! /usr/bin/python 修改为 #! /usr/bin/python2
vi /usr/libexec/urlgrabber-ext-down
# 把 #! /usr/bin/python 修改为 #! /usr/bin/python2sudo yum -y install perl-IPC-Cmd # 编译osg时，某个依赖编译时所需要的包export CFLAGS="-std=c99" #编译fontconfig、pcre2要c99标准sudo yum install -y libxi-devel mesa-libGLU-devel #编译freeglut要安装libxi-devel和mesa-libGLU-devel
#编译gdal需要高版本的gcc
sudo yum install -y centos-release-scl #安装CentOS SCL仓库
sudo yum install -y devtoolset-8 #安装所需的devtoolset包（例如，devtoolset-8）
scl enable devtoolset-8 bash #激活devtoolset以使用新的GCC版本
gcc --version #检查GCC版本是否已更新
#请注意，激活仅对当前会话有效
- 安装osg
vcpkg install osg
- 测试是否安装成功
#include <osg/Geode>
#include <osg/Geometry>
#include <osgViewer/Viewer>
#include <iostream>
int main()
{// Create a root nodeosg::ref_ptr<osg::Group> root = new osg::Group;// Create a Geode containing a simple cubeosg::ref_ptr<osg::Geode> geode = new osg::Geode;osg::ref_ptr<osg::Geometry> geometry = new osg::Geometry;osg::ref_ptr<osg::Vec3Array> vertices = new osg::Vec3Array;vertices->push_back(osg::Vec3(-0.5, -0.5, 0));vertices->push_back(osg::Vec3(0.5, -0.5, 0));vertices->push_back(osg::Vec3(0.5, 0.5, 0));vertices->push_back(osg::Vec3(-0.5, 0.5, 0));geometry->setVertexArray(vertices);osg::ref_ptr<osg::DrawElementsUInt> quad =new osg::DrawElementsUInt(osg::PrimitiveSet::QUADS, 0);quad->push_back(0);quad->push_back(1);quad->push_back(2);quad->push_back(3);geometry->addPrimitiveSet(quad);geode->addDrawable(geometry);root->addChild(geode);std::cout<<"successed!"<<std::endl;// Create a viewer and set the scene dataosgViewer::Viewer viewer;viewer.setSceneData(root);// Run the viewer loopreturn viewer.run();
}
g++ -o osg_test osg_test.cpp -I/root/vcpkg/installed/x64-linux/include -Wl,--no-as-needed -L/root/vcpkg/installed/x64-linux/lib -losgViewer -losgUtil -losgGA -losgDB -losg -lOpenThreads -ldl -lGL -lpthread -lm -lstdc++
./osg_test
# 执行结果,打印出successed!就说明安装成功了，至于后面的报错应该与显卡驱动等有关，但是在linux中安装osg也不是为了渲染
# successed!
# Warning: GraphicsContext::WindowingSystemInterfaces::getWindowingSystemInterface() failed, no interfaces available.
# AcrossAllScreens::configure() : Error, no WindowSystemInterface available, cannot create windows.
# Viewer::realize() - failed to set up any windows